|Download this layer (87 MB)|
(ESRI shapefiles and ArcGIS 9.0 layer file)
*** Area F added on September 26, 2012 ***
|View this datalayer in an online map|
This data layer is part of a comprehensive study by the U.S. Geological Survey to produce a statewide digital map of the surficial geology at a 1:24,000-scale. This compilation of surficial geologic materials defines the areas of exposed bedrock, and the boundaries between glacial till, glacial stratified deposits, and overlying early-postglacial and postglacial deposits.
Four separate polygon datasets were developed:
See the Status Map file size 1MB for areas currently available. These layers revise previous digital surficial geologic maps (Stone and Beinikis, 1992, MassGIS Surficial Geology ) that were compiled on base maps at regional scales of 1:250,000.
- Till and Bedrock - areas of Thin Till, Thick Till, End Moraine Deposits, Bedrock Outcrops, and Areas of Abundant Outcrop and Shallow Bedrock. Thin till and bedrock outcrops polygons are mutually exclusive; thick till polygons overlie areas of thin till, and abundant outcrop/shallow bedrock polygons overlie areas of thin till and bedrock outcrops.The layer is named SURFGEO24K_TB_POLY.
- Stratified Deposits - areas of glacial stratified deposits, categorized as Coarse, Glaciolacustrine Fine, and Glaciomarine Fine. The layer is named SURFGEO24K_SD_POLY.
- Early Postglacial - areas of early postglacial Inland Dune and Marine Regressive Deposits. The layer is named SURFGEO24K_EPG_POLY.
- Postglacial - areas of Swamp Deposits, Floodplain Alluvium, Beach and Dune Deposits, and Artificial Fill. Swamp polygons may overlie alluvium polygons; artificial fill polygons may overlie areas of swamp or alluvium. The layer is named SURFGEO24K_PG_POLY.
Multiple agencies and individuals contributed to this data layer: MassGIS scanned and georeferenced paper copies of published surficial geologic maps, on a quadrangle-by-quadrangle basis. The Office of the Massachusetts State Geologist vectorized the georeferenced images and compiled geologic units in order to digitally retain the original information on the published maps (Stephen Mabee and others, 2004). U.S. Geological Survey personnel compiled and on-screen digitized the basic units for unpublished quadrangles from scanned field maps, and then joined and edge-matched the quads in order to form seamless geologic layers. Work at the USGS was compiled by Byron D. Stone, Janet R. Stone, and Mary L. DiGiacomo-Cohen.
Each layer's polygon attribute table contains the items LEGEND and MAP_UNIT. Codes for each layer are as follows:
Layer Name LEGEND MAP_UNIT SURFGEO24K_TB_POLY bk bedrock outcrop em end moraine deposits sb areas of abundant outcrop and/or shallow bedrock t thin till t/s till overlying sand deposits tm thrust-moraine deposits; thrust moraine tt thick till SURFGEO24K_SD_POLY sd-c glacial stratified deposits, coarse sd-f glacial stratified deposits, fine; glacial stratified deposits, glaciolacustrine fine sd-fm glacial stratified deposits, glaciomarine fine sid stagnant-ice deposits SURFGEO24K_EPG_POLY alf alluvial fan deposits d early postglacial inland dune deposits; inland dune deposits mr early postglacial marine regressive deposits st stream-terrace deposits ta talus deposits SURFGEO24K_PG_POLY af artificial fill al alluvium; floodplain alluvium b; bd beach and dune deposits cb cranberry bog ff valley-floor fluvial deposits sm salt-marsh deposits sw swamp and marsh deposits, swamp deposits
Multiple values for some LEGEND or MAP_UNIT codes are listed because different values were used in different compilation areas. For full details on the map unit descriptions, see the FGDC-compliant metadata distributed with the data.
Displaying the Data
Because of overlapping polygons amongst the layers, and because some map units in each layer are not mutually exclusive, the order in which the layers are drawn is important in order to to correctly represent the physical nature of the geologic features. When displaying the data in ArcGIS, it is best to use the group layer file developed by USGS and modified by MassGIS for use with our SDE layers and exported shapefiles. The layer file includes definition queries and the preferred symbology developed by USGS.
All layers should be displayed together and, for better context, overlaid with basemap features such as roads, elevation contours, shaded relief, hydrography, and geographic annotation (as indicated in the layer's sample image - geology with basemap features ). At map scales of 1:15,000 or larger (i.e., more zoomed in), USGS recommends overlaying images of 1:24,000 topographic quadrangle basemap features (see sample image - geology with quad image ). These images were scanned specifically for this surficial geology project and were used as the base for on-screen digitizing of geologic map units. See the USGS 1:24,000 Surficial Geology Topographic Base Map Images.
Non-ArcGIS users should refer to the group layer file image for the proper symbology, datasets, and definition queries when displaying the data.
The USGS is actively developing these layers. New data will be made available when received by MassGIS. Please note that some data now available through MassGIS may be replaced with updated versions as USGS' data development project continues. See the Status Map file size 1MB for areas currently available (based on the Surficial Geology (1:24,000) Status Index layer).
For information on specific areas and access to interim data products and imagery, see http://www.geo.umass.edu/stategeologist/frame_maps.htm.
Last Updated 6/12/2014
People also viewed...
You recently viewed...
Personalization is OFF. Your personal browsing history at Mass.gov is not visible because your personalization is turned off. To view your history, turn your personalization on.
Learn more on our .
*Recommendations are based on site visitor traffic patterns and are not endorsements of that content.