Mass.Gov logo  * Mass.Gov Home Page  * State Government  * State Online Services

Seal of the Commonwealth of Massachusetts
CZM Logo top Massachusetts Office of Coastal Zone Management
Search
Board of Underwater Archaeological Resources Regulations

List of Exempt Shipwrecks

Board Meeting Information

Contact the Board

Underwater Archaeology Links

BUAR Home


CZM logo bottom
CZM Navigation Bar CZM Navigation Bar


Herbert 

Description: Lighter, wood.
Dimensions: length 128.4 ft., width 30.9 ft., depth 10.1 ft.
Tonnage: gross 349.
Propulsion: Steam, single propeller.
Machinery: 2, single crank steam engines; 2, Scotch type, firetube boilers; Steam Winch.
Cargo:

The Shipwreck

Date Sunk: August 5, 1924.
Cause: Collision.
Location: Off Nahant.
Coordinates:
Loran: 13961.2 and 44297.1.

     A thick fog had settled over the waters of Broad Sound as the steam lighter Herbert made her way to Ipswich, from her homeport of Boston. Unknown to Herbert's Captain the passenger steamer City of Gloucester was on a collision course, coming down the coast on his regular run.
     While still about 3 miles east of Nahant the south bound passenger steamer shot out of the fog ahead of Herbert and plowed into the smaller steamers port bow, about 20 feet aft of the stem. Seeing their vessel was doomed, Herbert's crew abandoned ship and was picked up by the City of Gloucester. Mortally wounded Herbert sank in fifteen minutes, miraculously there was no loss of life.
     Both Captains were found to be at fault, their licenses were suspended for 15 days and they and the vessels' owners were fined.

Dive Site Conditions

Depth in feet: maximum 97, minimum 90.
Visibility in feet:

     From forward, swimming aft, the bow in unrecognizable, just scattered debris on a sandy bottom. The first recognizable structure found was the vessels steam operated winch. Herbert had a clam shell excavator, which can be found about 20 feet off the starboard side of the wreck, near amidships. The winch is heavily corroded and encrusted with marine life. Continuing aft little but an outline remains of the vessel's staunch wooden hull. Its two massive boilers stand upright at the stern of the vessel.
     When I dove this wreck, in 1997, I got the impression the boilers were oil fired, due to the relatively small stoke holes. However these holes may have been access to an ash pit, the actual stoke holes perhaps corroded shut. It was a tight squeeze between the boiler but well worth it. On the other side I found myself surrounded by machinery from the age of steam. Two, tall single cylinder steam engines stand side by side, partially shrouded by fishing nets. What information I've dug up so far has led me to believe Herbert was a single propeller vessel. The shafts of these two engines lead into a large unidentified piece of machinery, which might comprise some form of reduction gear to a single propeller. Herbert's stern is a confused mass of wreckage, there was no sign of shafts or propellers.

Historical Background

Constructed: year 1910, at Noank, Connecticut by Robert Palmer & Son.
Construction details:
Crew: 12; Master:
Owners: Boston Sand and Gravel Company.
Home or Hailing Port: Boston, Massachusetts.
Former Name(s) and date(s):
Official number: 207913. Country: U.S.A.
Other Comments:

Salvage

Sources:
Fishable Wrecks and Rockpiles; Coleman & Soares, 1989
Merchant Vessels of the United States; 1924
Merchant Vessels of the United States, Vessels Lost Chapter; 1925
The Fishermen Magazine; February, 1989

 
 

 
COASTAL ZONE MANAGEMENT
251 Causeway Street, Suite 800Boston, MA 02114
617-626-1200617-626-1240 (fax)
czm@state.ma.us
Contact Us
About Us
Site Policies
Last Updated: