Municipal Waste Combustors: Covanta of SEMASS Technical Profile

Information on MWC units subject to 7.08(2)
	Testing Frequency
Facility name		Covanta of SEMASS	Covanta of SEMASS	Covanta of SEMASS
Facility address		141 Cranberry Highway	141 Cranberry Highway	141 Cranberry Highway
City		Rochester, MA 02770	Rochester, MA 02770	Rochester, MA 02770
DEP region		SERO	SERO	SERO
FMF number		131580	131580	131580
SSEIS number		120/1	120/1	120/1
Unit number		1	2	3
Unit capacity; tons/day		1,000	1,000	1,000
Unit design		Refuse-derived fuel stoker	Refuse-derived fuel stoker	Refuse-derived fuel stoker
particulate matter control device (PMCD)		ESP & COHPAC	ESP & COHPAC	FF
other controls		SDA,CI	SDA,CI	SDA,SNCR
Pollutant/Parameter Monitored And Units Of Standard/Averaging Time
cadmium; mg/dscm @ 7%O2	9 month	0.04	0.04	0.04
averaging time		test method	test method	test method
mercury; mg/dscm @ 7%O2	quarter or 9 month	0.028, 0.065, 0.080	0.028, 0.065, 0.080	0.028, 0.065, 0.080
averaging time		test method	test method	test method
lead; mg/dscm @7% O2	9 month	0.44	0.44	0.44
averaging time		test method	test method	test method
dioxin/furan; ng/dscm @ 7% O2	9 month or 27 month	60	60	30
averaging time		test method	test method	test method
particulate matter; mg/dscm@7% O2	9 month	27	27	27
averaging time		test method	test method	test method
sulfur dioxide (SO2); less stringent of limit or percent reduction	9 month	29ppmvd/75%	29ppmvd/75%	29ppmvd/80%
averaging time		24 hour block geom avg.	24 hour block geom avg.	24 hour block geom avg.
hydrogen chloride (HCl); less stringent of limit or % reduction	9 month	29ppmvd/95%	29ppmvd/95%	25ppmvd/95%
averaging time		test method	test method	test method
nitrogen oxides (NOx);ppmvd @ 7% O2	CEMS	250	250	180
averaging time		24 hour arithmetic average	24 hour arithmetic average	24 hour arithmetic average
carbon monoxide (CO);ppmvd @ 7%O2	CEMS	200	200	150
averaging time		24 hour block arithmetic average	24 hour block arithmetic average	24 hour block arithmetic average
PMCD inlet temp; degrees F or C	CMS	inlet temperature during last dioxin test + 17C(30F)	inlet temperature during last dioxin test + 17C(30F)	inlet temperature during last dioxin test + 17C(30F)
averaging time		test method	test method	test method
unit load; pounds of steam per hr	CMS	110% of load during last dioxin test	110% of load during last dioxin test	110% of load during last dioxin test
averaging time		4 hr block arithmetic average	4 hr block arithmetic average	4 hr block arithmetic average
carbon feedrate for mercury; pounds of carbon per hour	quarterly or 9 month	greater than or equal to approved rate from mercury optimization testing	greater than or equal to approved rate from mercury optimization testing	N.A.
averaging time		test method	test method	NA
carbon feedrate for dioxin/furan; pounds of carbon per hour	9 month or 27 month	greater than or equal to approved rate from mercury optimization testing	greater than or equal to approved rate from mercury optimization testing	NA
averaging time		test method	test method	NA
carbon feedrate parameter; determined by applicant	CMS	greater than or equal to measured value during last mercury compliance test AND last dioxin compliance test	greater than or equal to measured value during last mercury compliance test AND last dioxin compliance test	NA
averaging time		determined later	determined later	NA
opacity; percent	9 month	10%	10%	10%
averaging time		test method	test method	test method
opacity; percent	COMS	10%	10%	10%
averaging time		6 minutes	6 minutes	6 minutes
fugitive ash; percent of time	9 months	5% of time	5% of time	5% of time
averaging time		test method	test method	test method