WS 35: Permit to Install Multiple Vending Machines

Approval to install a vending machine or treatment device at more than 10 locations

MassDEP Drinking Water Program

Phone

Program Director 617-292-5770

Online

MassDEP Drinking Water Program program.director-dwp@state.ma.us

The Details

What you need

This permit serves to protect the public's health and welfare through the control of any product or operation that comes into contact with public drinking water. These products and operations must be controlled to prevent contaminants from leaking into the drinking water as well as to ensure that the products and operations work as designed. This permit consists of an approval for the installation of one type of MassDEP approved vending machine or point-of-use (POU) treatment device or point-of-entry (POE) treatment device at 10 or more locations on the same distribution system. Legislative authority for this permit is stated in MGL Chapter 111, Section 160A. The Regulatory authority for this permit is stated in 310 CMR 22.04 and 310 CMR 22.23 of the Drinking Water Regulations.

Public Water Systems (PWS), facility owners, manufacturers or their designated representatives seeking approval for the installation of one type of vending Machine or POU/POE treatment device at 10 or more locations on the same distribution system. If less than 10 vending machines or POU/POE devices are to be installed on a distribution system, see application WS 30. POE devices that are installed solely to enhance the aesthetic quality of the drinking water, and meet the minimum requirements detailed in 310 CMR 22.23 (6), are not required to apply for this permit.

In addition to this permit, it may also be necessary to apply for other Mass DEP water treatment permits, e.g. WS 21, 22, 23, 24, 25, 28, 29, or 34.

Note: These additional requirements are intended to serve as a guide to the applicant. They do not necessarily include all additional requirements.

How to apply

See details below.

Next steps

  1. Review the Instructions

    Guidance on how to prepare your application, including a completeness checklist.

  2. Complete the Application Form

    You may fill out and save the Microsoft Word form on your computer.  The PDF version has to be printed out and completed by hand.

  3. Obtain a Transmittal Form and Number

    A unique Transmittal Number is needed for each application you submit to MassDEP.

  4. Lookup the Permit Application Fee

  5. Mail Your Application and Fee Payment

    Submit your application fee payment and a copy of your Transmittal Form to:

    Department of Environmental Protection
    PO Box 4062
    Boston, MA 02211

    Submit your completed, signed application and your original Transmittal Form to the appropriate MassDEP Regional Office (see listing below).

Contact

Address

MassDEP Boston
1 Winter Street, Boston, MA 02108

Phone

Program Director 617-292-5770

Online

MassDEP Drinking Water Program program.director-dwp@state.ma.us

Feedback

Tell us what you think