Guidelines for Use of Part II Files
The files needed to create the Construction Drawings/Sketch Plans are posted here in both AutoCAD and PDF formats. The files intended only for viewing and not for the actual construction drawing/sketch plan creation are posted here in PDF format only.
The typical details at abutments have been divided between the Abutment and Wingwall (Chapter 4) and the Beam Detail Chapters (Chapters 8 through 11). The details that are associated with the abutment stem are shown in Chapter 4 with the superstructure details grayed out. Conversely, the beam detail chapters provide the details associated with the beam type and the details associated with the abutment stem are grayed out. It is the responsibility of the Designer to combine the relevant details together when preparing the Construction Drawings.
Standard Railings, Screens, Terminuses, and Highway Guardrail Transitions are a standard for all projects and thus, are a part of Part II Standard Details. They are intended for use mainly unchanged. However, certain information, such as detail and section numbers, construction drawing sheet number, etc. may have to be changed as required for a particular set of plans. The Section Symbol, the Subsequent Sheet Block, and the Federal Block are attribute blocks and may be edited by the user at any time as needed.
- Download the Part II Inner Page
Chapter 1: Preparation of Plans
Download the complete Chapter 1 as a PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Preparation of Plans Table of Contents | 1.0.1 PDF | April 2024 |
1.1 Construction Drawings
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Standard First Sheet | 1.1.1 PDF | April 2024 | ||
| Standard Subsequent Sheets | 1.1.2 PDF | April 2024 | ||
| In-House Design Title Block | 1.1.3 PDF | April 2024 | ||
| Consultant Design Title Block | 1.1.4 PDF | April 2024 | ||
| Miscellaneous Blocks | 1.1.5 PDF | April 2024 | ||
| Traffic Data Block | 1.1.6 PDF | April 2024 | ||
| Seismic Data Block | 1.1.7 PDF | April 2024 | ||
| Hydraulic Data Block | 1.1.8 PDF | April 2024 | ||
| Temporary Water Control Data Block | 1.1.9 PDF | April 2024 | ||
| Revisions to First Sheet | 1.1.10 PDF | April 2024 | ||
| Revisions to Subsequent Sheets | 1.1.11 PDF | April 2024 |
1.2 Sketch Plans
1.3 Boring Plans
Chapter 2: Bridge Geometry
Download the complete Chapter 2 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bridge Geometry Table of Contents | 2.0.1 PDF | April 2024 | January 2025 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
2.1 Clearances Under Bridge - Highway
| Description | AutoCAD | Issue Date | Revision Date |
|---|
2.2 Clearances Under Bridge - Railroad
| Description | AutoCAD | Issue Date | Revision Date |
|---|
2.3 Excavation Support Requirements
| Description | AutoCAD | Issue Date | Revision Date |
|---|
2.4 Foundations and Fill
| Description | AutoCAD | Issue Date | Revision Date |
|---|
2.5 Scour Countermeasures
| Description | AutoCAD | Issue Date | Revision Date |
|---|
2.6 Pier Protection
Chapter 3: Foundations
Download the complete Chapter 3 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Foundations Table of Contents | 3.0.1 PDF | April 2024 |
3.1 Foundations and Fill
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Gravel Borrow for Bridge Foundations | 3.1.1 CAD | 3.1.1 PDF | April 2024 | |
| Crushed Stone for Bridge Foundations | 3.1.2 CAD | 3.1.2 PDF | April 2024 | |
| Modifications for Footings on Rock | 3.1.3 PDF | April 2024 | ||
| Cofferdam Details | 3.1.4 CAD | 3.1.4 PDF | April 2024 | |
| Limits of Gravel Borrow for Backfilling Structures and Pipes | 3.1.5 CAD | 3.1.5 PDF | April 2024 |
3.2 Stepped-Up Footing
3.3 H-Piles
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Section Through Pile Cap | 3.3.1 CAD | 3.3.1 PDF | April 2024 | |
| CJP Splice Details | 3.3.2 CAD | 3.3.2 PDF | April 2024 | |
| Welded Mechanical Splice Details | 3.3.3 CAD | 3.3.3 PDF | April 2024 | |
| Mechanical Splicer Installation Notes | 3.3.4 CAD | 3.3.4 PDF | April 2024 | |
| Driven Pile Construction Notes | 3.3.5 CAD | 3.3.5 PDF | April 2024 | |
| Driven Pile Construction Notes (Continued) | 3.3.6 CAD | 3.3.6 PDF | April 2024 | |
| Piles in Drilled Holes Construction Notes | 3.3.7 CAD | 3.3.7 PDF | April 2024 |
3.4 Steel Pipe Piles
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Section Through Pile Cap | 3.4.1 CAD | 3.4.1 PDF | April 2024 | |
| Pile Cap for Pile Bent Concrete Beams | 3.4.2 CAD | 3.4.2 PDF | April 2024 | |
| Pile Cap for Pile Bent Steel Beams | 3.4.3 CAD | 3.4.3 PDF | April 2024 | |
| Pile Splice and Pile Tip Details | 3.4.4 CAD | 3.4.4 PDF | April 2024 | |
| Construction Notes | 3.4.5 CAD | 3.4.5 PDF | April 2024 | |
| Construction Notes (Continued) | 3.4.6 CAD | 3.4.6 PDF | April 2024 |
3.5 Drilled Shafts
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Drilled Shaft Cap Plan | 3.5.1 CAD | 3.5.1 PDF | April 2024 | |
| Vertical Section Between Columns | 3.5.2 CAD | 3.5.2 PDF | April 2024 | |
| Vertical Section Through Column | 3.5.3 CAD | 3.5.3 PDF | April 2024 | |
| Horizontal Sections Through Shaft | 3.5.4 CAD | 3.5.4 PDF | April 2024 | |
| Horizontal Section Through Shaft Cap | 3.5.5 CAD | 3.5.5 PDF | April 2024 | |
| Horizontal Section Through Shaft With Centering Devices | 3.5.6 CAD | 3.5.6 PDF | April 2024 | |
| Designer Notes | 3.5.7 PDF | April 2024 | ||
| Construction Notes | 3.5.8 CAD | 3.5.8 PDF | April 2024 | |
| Construction Notes (Continued) | 3.5.9 CAD | 3.5.9 PDF | April 2024 |
3.6 Micropiles
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Pile Details and Layout | 3.6.1 CAD | 3.6.1 PDF | April 2024 | |
| Vertical Section Through Pile | 3.6.2 CAD | 3.6.2 PDF | April 2024 | |
| Horizontal Sections Through Pile | 3.6.3 CAD | 3.6.3 PDF | April 2024 | |
| Typical Connection Detail | 3.6.4 CAD | 3.6.4 PDF | April 2024 | |
| Construction Notes | 3.6.5 CAD | 3.6.5 PDF | April 2024 | |
| Construction Notes (Continued) | 3.6.6 CAD | 3.6.6 PDF | April 2024 |
Chapter 4: Abutments and Wingwalls
Download the complete Chapter 4 as PDF.
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.1 General Abutment Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan | 4.1.1 CAD | 4.1.1 PDF | April 2024 | |
| Elevation with Stepped Seat | 4.1.2 CAD | 4.1.2 PDF | April 2024 | |
| Elevation with Sloped Seat | 4.1.3 CAD | 4.1.3 PDF | April 2024 | |
| Stub Abutment Section | 4.1.4 CAD | 4.1.4 PDF | April 2024 | January 2025 |
| Gravity Abutment Section | 4.1.5 CAD | 4.1.5 PDF | April 2024 | January 2025 |
| Cantilever Abutment Section | 4.1.6 CAD | 4.1.6 PDF | April 2024 | January 2025 |
| Construction Notes | 4.1.7 CAD | 4.1.7 PDF | April 2024 | |
| Construction Joint | 4.1.8 CAD | 4.1.8 PDF | April 2024 | |
| Section Through Construction Joint | 4.1.9 CAD | 4.1.9 PDF | April 2024 | |
| Expansion Joint Details | 4.1.10 CAD | 4.1.10 PDF | April 2024 | |
| Section Through Expansion Joint | 4.1.11 CAD | 4.1.11 PDF | April 2024 | |
| Limits of Preformed Filler in Expansion Joint | 4.1.12 CAD | 4.1.12 PDF | April 2024 | |
| 5'' and 9'' Plastic Waterstops | 4.1.13 CAD | 4.1.13 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.2 Abutment Details - Stringer Bridges
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan | 4.2.1 CAD | 4.2.1 PDF | April 2024 | |
| Elevation | 4.2.2 CAD | 4.2.2 PDF | April 2024 | |
| Horizontal Section at U-Wingwall | 4.2.3 CAD | 4.2.3 PDF | April 2024 | |
| Vertical Section at U-Wingwall | 4.2.4 CAD | 4.2.4 PDF | April 2024 | |
| Horizontal Section Below Bridge Seat at U-Wingwall | 4.2.5 CAD | 4.2.5 PDF | April 2024 | |
| Horizontal Section at Splayed Wingwall | 4.2.6 CAD | 4.2.6 PDF | April 2024 | |
| Vertical Section at Splayed Wingwall | 4.2.7 CAD | 4.2.7 PDF | April 2024 | |
| Horizontal Section Below Bridge Seat at Splayed Wingwall | 4.2.8 CAD | 4.2.8 PDF | April 2024 | |
| Intermediate Keeper Block | 4.2.9 CAD | 4.2.9 PDF | April 2024 | |
| Vertical Section at Keeper Block | 4.2.10 CAD | 4.2.10 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.3 Backwall Details - Stringer Bridges
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Roadway Section with Pavement Sawcut | 4.3.1 CAD | 4.3.1 PDF | April 2024 | |
| Sidewalk Section with Pavement Sawcut | 4.3.2 CAD | 4.3.2 PDF | April 2024 | |
| Construction Notes for Sections with Pavement Sawcut | 4.3.3 CAD | 4.3.3 PDF | April 2024 | |
| Roadway Section with Asphaltic Bridge Joint | 4.3.4 CAD | 4.3.4 PDF | April 2024 | |
| Sidewalk Section with Asphaltic Bridge Joint | 4.3.5 CAD | 4.3.5 PDF | April 2024 | |
| Construction Notes for Sections with Asphaltic Bridge Joint | 4.3.6 CAD | 4.3.6 PDF | April 2024 | |
| End of Deck Elevation and Trough Drain Details | 4.3.7 CAD | 4.3.7 PDF | April 2024 | |
| Roadway Section with Strip Seal Joint | 4.3.8 CAD | 4.3.8 PDF | April 2024 | January 2025 |
| Sidewalk Section with Strip Seal Joint | 4.3.9 CAD | 4.3.9 PDF | April 2024 | January 2025 |
| Construction Notes for Sections with Strip Seal Joint | 4.3.10 CAD | 4.3.10 PDF | April 2024 | January 2025 |
| 10'' Plastic Waterstop Details | 4.3.11 CAD | 4.3.11 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.4 Abutment Details - Adjacent Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan | 4.4.1 CAD | 4.4.1 PDF | April 2024 | |
| Elevation | 4.4.2 CAD | 4.4.2 PDF | April 2024 | |
| Horizontal Section Through U-Wingwall | 4.4.3 CAD | 4.4.3 PDF | April 2024 | |
| Vertical Section at U-Wingwall | 4.4.4 CAD | 4.4.4 PDF | April 2024 | |
| Horizontal Section Below Bridge Seat at U-Wingwall | 4.4.5 CAD | 4.4.5 PDF | April 2024 | |
| Horizontal Section at Splayed Wingwall | 4.4.6 CAD | 4.4.6 PDF | April 2024 | |
| Vertical Section at Splayed Wingwall | 4.4.7 CAD | 4.4.7 PDF | April 2024 | |
| Horizontal Section Below Bridge Seat at Splayed Wingwall | 4.4.8 CAD | 4.4.8 PDF | April 2024 | |
| Horizontal Section at Keeper Block | 4.4.9 CAD | 4.4.9 PDF | April 2024 | |
| Vertical Section at Keeper Block | 4.4.10 CAD | 4.4.10 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.5 Backwall Details - Adjacent Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Roadway Section for 12'' and 15'' Deep Deck Beams | 4.5.1 CAD | 4.5.1 PDF | April 2024 | |
| Roadway Section for 18'' and 21'' Deep Deck Beams | 4.5.2 CAD | 4.5.2 PDF | April 2024 | |
| Roadway Section for Box Beams | 4.5.3 CAD | 4.5.3 PDF | April 2024 | |
| Sidewalk Section for Deck and Box Beams | 4.5.4 CAD | 4.5.4 PDF | April 2024 | |
| Utility Bay Section for Deck and Box Beams | 4.5.5 CAD | 4.5.5 PDF | April 2024 | |
| Construction Notes | 4.5.6 CAD | 4.5.6 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.6 Approach Slabs
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| General Plan | 4.6.1 PDF | April 2024 | January 2025 | |
| Type I | 4.6.2 CAD | 4.6.2 PDF | April 2024 | |
| Type II | 4.6.3 CAD | 4.6.3 PDF | April 2024 | |
| Type III | 4.6.4 CAD | 4.6.4 PDF | April 2024 | |
| Type IV | 4.6.5 CAD | 4.6.5 PDF | April 2024 | |
| Removable Panel for Slab Types II and III | 4.6.6 CAD | 4.6.6 PDF | April 2024 | |
| Removable Panel for Slab Types I and IV | 4.6.7 CAD | 4.6.7 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.7 Wingwalls
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| U-Wingwall Elevation | 4.7.1 CAD | 4.7.1 PDF | April 2024 | |
| Splayed Wingwall Elevation | 4.7.2 CAD | 4.7.2 PDF | April 2024 | |
| Long Retaining Wall Elevation | 4.7.3 CAD | 4.7.3 PDF | April 2024 | |
| Typical Gravity Retaining Wall Section | 4.7.4 CAD | 4.7.4 PDF | April 2024 | |
| Typical Cantilever Retaining Wall Section | 4.7.5 CAD | 4.7.5 PDF | April 2024 | |
| Construction Notes | 4.7.6 CAD | 4.7.6 PDF | April 2024 | |
| Modifications for Gravity U-Wingwall | 4.7.7 PDF | April 2024 | ||
| Modifications for Cantilever U-Wingwall | 4.7.8 PDF | April 2024 | ||
| Construction Joint Details | 4.7.9 CAD | 4.7.9 PDF | April 2024 | |
| Vertical Section Through Construction Joint | 4.7.10 CAD | 4.7.10 PDF | April 2024 | |
| Expansion Joint Details | 4.7.11 CAD | 4.7.11 PDF | April 2024 | |
| Vertical Section Through Expansion Joint | 4.7.12 CAD | 4.7.12 PDF | April 2024 | |
| Preformed Fillers in Expansion Joints | 4.7.13 CAD | 4.7.13 PDF | April 2024 | |
| Catch Basin at Back of U-Wingwall | 4.7.14 CAD | 4.7.14 PDF | April 2024 | |
| Utility Through U-Wingwall | 4.7.15 CAD | 4.7.15 PDF | April 2024 | |
| Utility Through Splayed Wingwall | 4.7.16 CAD | 4.7.16 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.8 Precast Highway Guardrail Transitions
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Elevation at U-Wingwall for S3-MTL4, CT-MTL2, CP-MTL3 at Sidewalk and S3-MTL4 at Safety Curb | 4.8.1 CAD | 4.8.1 PDF | April 2024 | January 2025 |
| Elevation at U-Wingwall for CT-MTL2 and CP-MTL3 at Safety Curb and CF-MTL5 | 4.8.2 CAD | 4.8.2 PDF | April 2024 | January 2025 |
| Construction and Designer Notes | 4.8.3 CAD | 4.8.3 PDF | April 2024 | January 2025 |
| Vertical Sections at U-Wingwall for S3-MTL4, CT-MTL2, CP-MTL3 at Sidewalk and S3-MTL4 at Safety Curb | 4.8.4 CAD | 4.8.4 PDF | April 2024 | |
| Horizontal Section | 4.8.5 CAD | 4.8.5 PDF | April 2024 | |
| Vertical Section at U-Wingwall for CT-MTL2 and CP-MTL3 | 4.8.6 CAD | 4.8.6 PDF | April 2024 | |
| Vertical Section at U-Wingwall for CF-MTL5 | 4.8.7 CAD | 4.8.7 PDF | April 2024 | |
| Plan at Splayed Wingwall | 4.8.8 CAD | 4.8.8 PDF | April 2024 | |
| Elevation at Splayed Wingwall | 4.8.9 CAD | 4.8.9 PDF | April 2024 | January 2025 |
| Horizontal Section at Splayed Wingwall | 4.8.10 CAD | 4.8.10 PDF | April 2024 | |
| Grading Requirements Elevation | 4.8.11 CAD | 4.8.11 PDF | April 2024 | |
| Grading Requirements Plan | 4.8.12 CAD | 4.8.12 PDF | April 2024 | |
| Grading for S3-MTL4 at Safety Curb | 4.8.13 CAD | 4.8.13 PDF | April 2024 | |
| Grading for CT-MTL2 and CP-MTL3 at Safety Curb | 4.8.14 CAD | 4.8.14 PDF | April 2024 | |
| Grading for S3-MTL4, CT-MTL2, and CP-MTL3 at Sidewalk | 4.8.15 CAD | 4.8.15 PDF | April 2024 | |
| Grading for CF-MTL5 | 4.8.16 CAD | 4.8.16 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
4.9 Striation Details
Chapter 5: Piers
Download the complete Chapter 5 as PDF.
5.1 General
5.2 Aesthetic Piers
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan for Caps without Inverted Shear Key | 5.2.1 CAD | 5.2.1 PDF | April 2024 | |
| Elevation for Caps without Inverted Shear Key | 5.2.2 CAD | 5.2.2 PDF | April 2024 | |
| Plan for Caps with Inverted Shear Key | 5.2.3 CAD | 5.2.3 PDF | April 2024 | |
| Elevation for Caps with Inverted Shear Key | 5.2.4 CAD | 5.2.4 PDF | April 2024 | |
| End Elevation | 5.2.5 CAD | 5.2.5 PDF | April 2024 | |
| Column Reinforcement | 5.2.6 CAD | 5.2.6 PDF | April 2024 | |
| Column Section for Caps without Inverted Shear Key | 5.2.7 CAD | 5.2.7 PDF | April 2024 | |
| Column Section for Caps with Inverted Shear Key | 5.2.8 CAD | 5.2.8 PDF | April 2024 | |
| Reinforcement of Caps without Inverted Shear Key | 5.2.9 CAD | 5.2.9 PDF | April 2024 | |
| Section Thru Cap without Inverted Shear Key | 5.2.10 CAD | 5.2.10 PDF | April 2024 | |
| Reinforcement of Caps with Inverted Shear Key | 5.2.11 CAD | 5.2.11 PDF | April 2024 | |
| Section Thru Cap with Inverted Shear Key | 5.2.12 CAD | 5.2.12 PDF | April 2024 |
5.3 Aesthetic Ramp Pier
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan | 5.3.1 CAD | 5.3.1 PDF | April 2024 | |
| Elevation | 5.3.2 CAD | 5.3.2 PDF | April 2024 | |
| End Elevation | 5.3.3 CAD | 5.3.3 PDF | April 2024 | |
| Pier Reinforcement | 5.3.4 CAD | 5.3.4 PDF | April 2024 | |
| Column Reinforcement | 5.3.5 CAD | 5.3.5 PDF | April 2024 | |
| Horizontal Column Section | 5.3.6 CAD | 5.3.6 PDF | April 2024 | |
| Vertical Section Thru Cap | 5.3.7 CAD | 5.3.7 PDF | April 2024 |
5.4 Aesthetic Solid Wall Pier
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan for Caps without Inverted Shear Key | 5.4.1 CAD | 5.4.1 PDF | April 2024 | |
| Elevation for Caps without Inverted Shear Key | 5.4.2 CAD | 5.4.2 PDF | April 2024 | |
| Plan for Caps with Inverted Shear Key | 5.4.3 CAD | 5.4.3 PDF | April 2024 | |
| Elevation for Caps with Inverted Shear Key | 5.4.4 CAD | 5.4.4 PDF | April 2024 | |
| End Elevation | 5.4.5 CAD | 5.4.5 PDF | April 2024 | |
| Reinforcement of Pier without Inverted Shear Key | 5.4.6 CAD | 5.4.6 PDF | April 2024 | |
| Solid Wall Reinforcement | 5.4.7 CAD | 5.4.7 PDF | April 2024 | |
| Horizontal Wall Section | 5.4.8 CAD | 5.4.8 PDF | April 2024 | |
| Modification of Solid Wall for River Pier | 5.4.9 CAD | 5.4.9 PDF | April 2024 | |
| Section Thru Cap without Inverted Shear Key | 5.4.10 CAD | 5.4.10 PDF | April 2024 | |
| Reinforcement of Pier with Inverted Shear Key | 5.4.11 CAD | 5.4.11 PDF | April 2024 | |
| Section Thru Cap with Inverted Shear Key | 5.4.12 CAD | 5.4.12 PDF | April 2024 |
5.5 Standard Piers
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Plan for Caps without Inverted Shear Key | 5.5.1 CAD | 5.5.1 PDF | April 2024 | |
| Elevation for Caps without Inverted Shear Key | 5.5.2 CAD | 5.5.2 PDF | April 2024 | |
| Plan for Caps with Inverted Shear Key | 5.5.3 CAD | 5.5.3 PDF | April 2024 | |
| Elevation for Caps with Inverted Shear Key | 5.5.4 CAD | 5.5.4 PDF | April 2024 | |
| End Elevation | 5.5.5 CAD | 5.5.5 PDF | April 2024 | |
| Column Reinforcement | 5.5.6 CAD | 5.5.6 PDF | April 2024 | |
| Horizontal Column Section | 5.5.7 CAD | 5.5.7 PDF | April 2024 | |
| Column Details | 5.5.8 CAD | 5.5.8 PDF | April 2024 | |
| Reinforcement of Caps without Inverted Shear Key | 5.5.9 CAD | 5.5.9 PDF | April 2024 | |
| Section Thru Cap without Inverted Shear Key | 5.5.10 CAD | 5.5.10 PDF | April 2024 | |
| Reinforcement of Caps with Inverted Shear Key | 5.5.11 CAD | 5.5.11 PDF | April 2024 | |
| Section Thru Cap with Inverted Shear Key | 5.5.12 CAD | 5.5.12 PDF | April 2024 |
5.6 Miscellaneous
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Cap End Details | 5.6.1 CAD | 5.6.1 PDF | April 2024 | |
| Cap End Details for Solid Wall Pier | 5.6.2 CAD | 5.6.2 PDF | April 2024 | |
| Cap End Reinforcement for Caps without Inverted Shear Key | 5.6.3 CAD | 5.6.3 PDF | April 2024 | |
| Cap End Reinforcement for Caps with Inverted Shear Key | 5.6.4 CAD | 5.6.4 PDF | April 2024 | |
| Cap End Reinforcement for Solid Wall Pier | 5.6.5 CAD | 5.6.5 PDF | April 2024 | |
| Keeper Block Reinforcement for Caps without Inverted Shear Key | 5.6.6 CAD | 5.6.6 PDF | April 2024 | |
| Reinforcement Keeper Block | 5.6.7 CAD | 5.6.7 PDF | April 2024 | |
| Options for Splicing of Longitudinal Column Reinforcement | 5.6.8 CAD | 5.6.8 PDF | April 2024 | |
| Modifications for Solid Wall River Piers | 5.6.9 CAD | 5.6.9 PDF | April 2024 | |
| Crash Wall Details | 5.6.10 CAD | 5.6.10 PDF | April 2024 |
Chapter 6: Bridge Seat Elevations
Download the complete Chapter 6 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bridge Seat Elevations Table of Contents | 6.0.1 PDF | April 2024 |
6.1 Stepped Bridge Seat Elevations
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bridge Seat Elevation Locations | 6.1.1 PDF | April 2024 | ||
| Steel Beams | 6.1.2 PDF | April 2024 | ||
| Prestressed NEBT Beams | 6.1.3 PDF | April 2024 | ||
| Prestressed Spread Box Beams | 6.1.4 PDF | April 2024 | ||
| Elevation Adjustment on One Substructure | 6.1.5 PDF | April 2024 | ||
| Elevation Adjustment Between Substructures | 6.1.6 PDF | April 2024 |
6.2 Sloped Bridge Seat Elevations
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bridge Seat Elevation Locations | 6.2.1 PDF | April 2024 | ||
| Prestressed Adjacent Deck and Box Beams | 6.2.2 PDF | April 2024 | ||
| Prestressed NEDBT Beams | 6.2.3 PDF | April 2024 | ||
| Prestressed Next D Beams | 6.2.4 PDF | April 2024 | ||
| Prestressed Next F Beams | 6.2.5 PDF | April 2024 | ||
| Elevation Adjustment Between Substructures | 6.2.6 PDF | April 2024 | ||
| Notes on Elevation Adjustment Between Substructures | 6.2.7 PDF | April 2024 |
6.3 Bearing Offsets
Chapter 7: Deck Details
Download the complete Chapter 7 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Deck Details Table of Contents | 7.0.1 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.1 Typical Deck Geometry
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Deck Reinforcement for Steel Beams | 7.1.1 CAD | 7.1.1 PDF | April 2024 | |
| Typical Deck Reinforcement for Adjacent Deck and Box Beams | 7.1.2 CAD | 7.1.2 PDF | April 2024 | |
| Typical Deck Reinforcement for Next F Beams | 7.1.3 CAD | 7.1.3 PDF | April 2024 | |
| Deck Wearing Surface Options | 7.1.4 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.2 Deck Slab Reinforcement
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.3 Additional Deck Overhang Reinforcement
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| CT-MTL2 Railing | 7.3.1 PDF | April 2024 | ||
| S3-MTL4 Railing | 7.3.2 PDF | April 2024 | ||
| CP-MTL3 Barrier | 7.3.3 PDF | April 2024 | ||
| CF-MTL5 Barrier | 7.3.4 PDF | April 2024 | ||
| All Barriers and Railings for Next F, Next D and NEDBT Beams | 7.3.5 PDF | April 2024 | ||
| Design Assumptions | 7.3.6 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.4 Haunch Details
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.5 Top of Deck Elevations
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.6 Top of Curb Elevations
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.7 Stay-In-Place Forms
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.8 Miscellaneous Deck Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Reinforcement Details at Corners | 7.8.1 CAD | 7.8.1 PDF | April 2024 | |
| Deck Pouring Sequence for Continuous Spans | 7.8.2 CAD | 7.8.2 PDF | April 2024 | |
| Section Over Pier for Continuous Spans | 7.8.3 CAD | 7.8.3 PDF | April 2024 | |
| Deck Pouring Sequence for Link Slabs | 7.8.4 CAD | 7.8.4 PDF | April 2024 | |
| Section Over Pier with Link Slab | 7.8.5 CAD | 7.8.5 PDF | April 2024 | |
| Construction Joints | 7.8.6 CAD | 7.8.6 PDF | April 2024 | |
| Construction and Designer Joint Notes | 7.8.7 CAD | 7.8.7 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
7.9 Drainage Details
Chapter 8: Steel Stringer Bridges
Download the complete Chapter 8 as PDF.
| Description | AutoCAD | Issue Date | Revision Date |
|---|
8.1 Rolled Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 8.1.1 CAD | 8.1.1 PDF | April 2024 | |
| Framing Plan (Skew ≤ 20°) | 8.1.2 CAD | 8.1.2 PDF | April 2024 | |
| Framing Plan (Skew > 20°) | 8.1.3 CAD | 8.1.3 PDF | April 2024 | |
| Construction Notes | 8.1.4 CAD | 8.1.4 PDF | April 2024 | January 2025 |
| Designer Notes | 8.1.5 PDF | April 2024 | January 2025 | |
| Beam Elevation | 8.1.6 CAD | 8.1.6 PDF | April 2024 | |
| Limits of Net Tensile Stress | 8.1.7 CAD | 8.1.7 PDF | April 2024 | |
| Cover Plate Details | 8.1.8 CAD | 8.1.8 PDF | April 2024 | |
| Intermediate Diaphragm | 8.1.9 CAD | 8.1.9 PDF | April 2024 | |
| End Diaphragm (Skew ≤ 20°) | 8.1.10 CAD | 8.1.10 PDF | April 2024 | |
| End Diaphragm (Skew > 20°) | 8.1.11 CAD | 8.1.11 PDF | April 2024 | |
| Round Bearing Stiffener (Skew > 20°) | 8.1.12 CAD | 8.1.12 PDF | April 2024 | |
| Steel Stringer Bridges End Diaphragm Sections | 8.1.13 CAD | 8.1.13 PDF | April 2024 | |
| Utility Support at Diaphragms | 8.1.14 CAD | 8.1.14 PDF | April 2024 | |
| Utility Support Between Diaphragms | 8.1.15 CAD | 8.1.15 PDF | April 2024 | |
| Utility Support at End Diaphragm (Skew ≤ 20°) | 8.1.16 CAD | 8.1.16 PDF | April 2024 | |
| Utility Support at End Diaphragm (Skew > 20°) | 8.1.17 CAD | 8.1.17 PDF | April 2024 | |
| Clip Detail for Stiffeners and Connection Plates | 8.1.18 CAD | 8.1.18 PDF | April 2024 | |
| Designer Notes for Diaphragms and Utility Supports | 8.1.19 PDF | April 2024 | ||
| Bolted Field Splice Details | 8.1.20 CAD | 8.1.20 PDF | April 2024 | |
| Roadway Section at Abutment with Pavement Sawcut | 8.1.21 CAD | 8.1.21 PDF | April 2024 | |
| Vertical Section at End Diaphragm at Abutment | 8.1.22 CAD | 8.1.22 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 8.1.23 CAD | 8.1.23 PDF | April 2024 | |
| Details at Abutment Construction Notes | 8.1.24 CAD | 8.1.24 PDF | April 2024 | |
| Deck Drains Details | 8.1.25 CAD | 8.1.25 PDF | April 2024 | January 2025 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
8.2 Plate Girders
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 8.2.1 CAD | 8.2.1 PDF | April 2024 | |
| Framing Plan (Skew ≤ 20°) | 8.2.2 CAD | 8.2.2 PDF | April 2024 | |
| Framing Plan (Skew > 20°) | 8.2.3 CAD | 8.2.3 PDF | April 2024 | |
| Construction Notes | 8.2.4 CAD | 8.2.4 PDF | April 2024 | January 2025 |
| Designer Notes | 8.2.5 PDF | April 2024 | January 2025 | |
| Girder Elevation | 8.2.6 CAD | 8.2.6 PDF | April 2024 | |
| Limits of Net Tensile Stress | 8.2.7 CAD | 8.2.7 PDF | April 2024 | |
| Parabolic Haunch Girders | 8.2.8 CAD | 8.2.8 PDF | April 2024 | |
| End Bearing Stiffener (Skew ≤ 20°) | 8.2.9 CAD | 8.2.9 PDF | April 2024 | |
| Round Bearing Stiffener (Skew > 20°) | 8.2.10 CAD | 8.2.10 PDF | April 2024 | |
| Intermediate Diaphragm (Depth ≤ 48'') | 8.2.11 CAD | 8.2.11 PDF | April 2024 | |
| Intermediate Cross Frame (Depth > 48'') | 8.2.12 CAD | 8.2.12 PDF | April 2024 | |
| End Diaphragm (Skew ≤ 20°, Depth ≤ 48'') | 8.2.13 CAD | 8.2.13 PDF | April 2024 | |
| End Cross Frame (Skew ≤ 20°, Depth > 48'') | 8.2.14 CAD | 8.2.14 PDF | April 2024 | |
| End Diaphragm (Skew ≤ 20°, Depth ≤ 48'') | 8.2.15 CAD | 8.2.15 PDF | April 2024 | |
| End Cross Frame (Skew > 20°, Depth > 48'') | 8.2.16 CAD | 8.2.16 PDF | April 2024 | |
| End Diaphragm Cross Frame Sections | 8.2.17 CAD | 8.2.17 PDF | April 2024 | |
| Utility Support at Brace Locations | 8.2.18 CAD | 8.2.18 PDF | April 2024 | |
| Utility Support Between Brace Locations | 8.2.19 CAD | 8.2.19 PDF | April 2024 | |
| Utility Support at End Diaphragm (Skew ≤ 20°) | 8.2.20 CAD | 8.2.20 PDF | April 2024 | |
| Utility Support at End Diaphragm (Skew > 20°) | 8.2.21 CAD | 8.2.21 PDF | April 2024 | |
| Clip Detail for Stiffeners and Connection Plates | 8.2.22 CAD | 8.2.22 PDF | April 2024 | |
| Designer Notes for Cross Frames | 8.2.23 PDF | April 2024 | January 2025 | |
| Bolted Field Splice Details | 8.2.24 CAD | 8.2.24 PDF | April 2024 | |
| Roadway Section at Abutment with Pavement Sawcut | 8.2.25 CAD | 8.2.25 PDF | April 2024 | |
| Roadway Section at Abutment with Asphaltic Bridge Joint | 8.2.26 CAD | 8.2.26 PDF | April 2024 | |
| Roadway Section at Abutment with Strip Seal Joint | 8.2.27 CAD | 8.2.27 PDF | April 2024 | January 2025 |
| Vertical Section at End Diaphragm at Abutment | 8.2.28 CAD | 8.2.28 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 8.2.29 CAD | 8.2.29 PDF | April 2024 | |
| Details at Abutment Notes | 8.2.30 CAD | 8.2.30 PDF | April 2024 | |
| Deck Drains Details | 8.2.31 CAD | 8.2.31 PDF | April 2024 | January 2025 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
8.3 Steel Box Girders
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 8.3.1 CAD | 8.3.1 PDF | April 2024 | |
| Typical Framing Plan | 8.3.2 CAD | 8.3.2 PDF | April 2024 | |
| Typical Geometry | 8.3.3 CAD | 8.3.3 PDF | April 2024 | |
| Construction Notes | 8.3.4 CAD | 8.3.4 PDF | April 2024 | |
| Designer Notes | 8.3.5 PDF | April 2024 | January 2025 | |
| Box Girder Elevation | 8.3.6 CAD | 8.3.6 PDF | April 2024 | |
| Limits of Net Tensile Stress (NSTM) | 8.3.7 CAD | 8.3.7 PDF | April 2024 | |
| Interior Intermediate Cross Frame Details | 8.3.8 CAD | 8.3.8 PDF | April 2024 | |
| Interior Intermediate Cross Frame Connection Details at Top Flange | 8.3.9 CAD | 8.3.9 PDF | April 2024 | |
| Interior Intermediate Cross Frame Connection Details at Bottom Flange | 8.3.10 CAD | 8.3.10 PDF | April 2024 | |
| Exterior Intermediate Cross Frame | 8.3.11 CAD | 8.3.11 PDF | April 2024 | |
| Cross Frame at Abutment | 8.3.12 CAD | 8.3.12 PDF | April 2024 | |
| Cross Frame at Pier | 8.3.13 CAD | 8.3.13 PDF | April 2024 | |
| End Cross Frame Connection Details | 8.3.14 CAD | 8.3.14 PDF | April 2024 | |
| Clip Detail for Stiffener and Connection Plates | 8.3.15 CAD | 8.3.15 PDF | April 2024 | |
| Bolted Field Splice Details | 8.3.16 CAD | 8.3.16 PDF | April 2024 | |
| Longitudinal Stiffener Details | 8.3.17 CAD | 8.3.17 PDF | April 2024 | |
| Inspection Access Hatch Details | 8.3.18 CAD | 8.3.18 PDF | April 2024 | |
| Inspection Access Hatch Details and Notes | 8.3.19 CAD | 8.3.19 PDF | April 2024 | |
| Drain Hole Details | 8.3.20 CAD | 8.3.20 PDF | April 2024 | |
| Girder Painting Requirements | 8.3.21 CAD | 8.3.21 PDF | April 2024 | January 2025 |
| Interior Linear Reference Requirements | 8.3.22 CAD | 8.3.22 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
8.4 Miscellaneous Details
Chapter 9: Prestressed Stringer Bridges with Conventional Deck
Download the complete Chapter 9 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Prestressed Stringer Bridges with Conventional Deck Table of Contents (1 of 3) | 9.0.1 PDF | April 2024 | ||
| Prestressed Stringer Bridges with Conventional Deck Table of Contents (2 of 3) | 9.0.2 PDF | April 2024 | January 2025 | |
| Prestressed Stringer Bridges with Conventional Deck Table of Contents (3 of 3) | 9.0.3 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
9.1 Prestressed NEBT Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 9.1.1 CAD | 9.1.1 PDF | April 2024 | |
| Framing Plan (Skew ≤ 30°) | 9.1.2 CAD | 9.1.2 PDF | April 2024 | |
| Framing Plan (Skew > 30°) | 9.1.3 CAD | 9.1.3 PDF | April 2024 | |
| Dimensions, Properties, and Span Table | 9.1.4 PDF | April 2024 | ||
| Design Assumptions for Span Table | 9.1.5 PDF | April 2024 | ||
| Strand Pattern Layout | 9.1.6 PDF | April 2024 | ||
| Typical Beam Dimensions | 9.1.7 CAD | 9.1.7 PDF | April 2024 | |
| Midspan Section | 9.1.8 CAD | 9.1.8 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 9.1.9 CAD | 9.1.9 PDF | April 2024 | |
| Beam Vertical Section at End of Beam | 9.1.10 CAD | 9.1.10 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 9.1.11 CAD | 9.1.11 PDF | April 2024 | |
| Construction Notes | 9.1.12 CAD | 9.1.12 PDF | April 2024 | January 2025 |
| Designer Notes | 9.1.13 PDF | April 2024 | ||
| Intermediate Diaphragm (Skew ≤ 30°) | 9.1.14 CAD | 9.1.14 PDF | April 2024 | |
| Intermediate Diaphragm (Skew > 30°) | 9.1.15 CAD | 9.1.15 PDF | April 2024 | |
| Intermediate Diaphragm Section | 9.1.16 CAD | 9.1.16 PDF | April 2024 | |
| Intermediate Diaphragm with Utility | 9.1.17 CAD | 9.1.17 PDF | April 2024 | |
| Intermediate Diaphragm Section with Utility | 9.1.18 CAD | 9.1.18 PDF | April 2024 | |
| Utility Bay Details (Preferred) | 9.1.19 CAD | 9.1.19 PDF | April 2024 | |
| Utility Bay Details (Alternate) | 9.1.20 CAD | 9.1.20 PDF | April 2024 | |
| Utility Support Details | 9.1.21 CAD | 9.1.21 PDF | April 2024 | |
| Stay-In-Place Form Attachment Detail | 9.1.22 CAD | 9.1.22 PDF | April 2024 | |
| Slab Overhang at Fascia Beam | 9.1.23 CAD | 9.1.23 PDF | April 2024 | |
| Deck Drains Details | 9.1.24 CAD | 9.1.24 PDF | April 2024 | January 2025 |
| Roadway Section at Abutment with Pavement Sawcut | 9.1.25 CAD | 9.1.25 PDF | April 2024 | |
| Roadway Section at Abutment with Asphaltic Bridge Joint | 9.1.26 CAD | 9.1.26 PDF | April 2024 | |
| Vertical Section at End Diaphragm at Abutment | 9.1.27 CAD | 9.1.27 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 9.1.28 CAD | 9.1.28 PDF | April 2024 | |
| Utility Bay Details at Abutment | 9.1.29 CAD | 9.1.29 PDF | April 2024 | |
| Details at Abutment Construction Notes | 9.1.30 CAD | 9.1.30 PDF | April 2024 | |
| Roadway Section at Pier | 9.1.31 CAD | 9.1.31 PDF | April 2024 | |
| Vertical Section at Pier Diaphragm | 9.1.32 CAD | 9.1.32 PDF | April 2024 | |
| Horizontal Section at Pier Diaphragm | 9.1.33 CAD | 9.1.33 PDF | April 2024 | |
| Details at Pier Construction Notes | 9.1.34 CAD | 9.1.34 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
9.2 Prestressed Next F Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 9.2.1 CAD | 9.2.1 PDF | April 2024 | |
| Framing Plan | 9.2.2 CAD | 9.2.2 PDF | April 2024 | |
| Dimensions, Properties, and Span Table | 9.2.3 PDF | April 2024 | ||
| Design Assumptions for Span Table | 9.2.4 PDF | April 2024 | ||
| Strand Pattern Layout | 9.2.5 PDF | April 2024 | ||
| Typical Beam Dimensions | 9.2.6 CAD | 9.2.6 PDF | April 2024 | |
| Midspan Section | 9.2.7 CAD | 9.2.7 PDF | April 2024 | |
| End of Beam Plan at Abutment | 9.2.8 CAD | 9.2.8 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 9.2.9 CAD | 9.2.9 PDF | April 2024 | |
| Vertical Section at End of Beam | 9.2.10 CAD | 9.2.10 PDF | April 2024 | |
| Beam Horizontal Section at Abutment | 9.2.11 CAD | 9.2.11 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 9.2.12 CAD | 9.2.12 PDF | April 2024 | |
| Beam Horizontal Section at Pier | 9.2.13 CAD | 9.2.13 PDF | April 2024 | |
| Construction Notes | 9.2.14 CAD | 9.2.14 PDF | April 2024 | |
| Designer Notes | 9.2.15 PDF | April 2024 | ||
| Utility Bay Details | 9.2.16 CAD | 9.2.16 PDF | April 2024 | |
| Utility Support Details | 9.2.17 CAD | 9.2.17 PDF | April 2024 | |
| Deck Drain Details | 9.2.18 CAD | 9.2.18 PDF | April 2024 | January 2025 |
| Beam Flange at Fascia | 9.2.19 CAD | 9.2.19 PDF | April 2024 | |
| Roadway Section at Abutment with Pavement Sawcut | 9.2.20 CAD | 9.2.20 PDF | April 2024 | |
| Vertical Section at End Diaphragm at Abutment | 9.2.21 CAD | 9.2.21 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 9.2.22 CAD | 9.2.22 PDF | April 2024 | |
| Utility Bay Details at Abutment | 9.2.23 CAD | 9.2.23 PDF | April 2024 | |
| Details at Abutment Construction Notes | 9.2.24 CAD | 9.2.24 PDF | April 2024 | |
| Roadway Section at Pier | 9.2.25 CAD | 9.2.25 PDF | April 2024 | |
| Vertical Section at Pier Diaphragm | 9.2.26 CAD | 9.2.26 PDF | April 2024 | |
| Horizontal Section at Pier Diaphragm | 9.2.27 CAD | 9.2.27 PDF | April 2024 | |
| Details at Pier Construction Notes | 9.2.28 CAD | 9.2.28 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
9.3 Prestressed Box Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 9.3.1 CAD | 9.3.1 PDF | April 2024 | |
| Framing Plan (Skew ≤ 30°) | 9.3.2 CAD | 9.3.2 PDF | April 2024 | |
| Framing Plan (Skew > 30°) | 9.3.3 CAD | 9.3.3 PDF | April 2024 | |
| Dimensions, Properties, and Span Table of 36" Wide Beams | 9.3.4 PDF | April 2024 | ||
| Dimensions, Properties, and Span Table of 48" Wide Beams | 9.3.5 PDF | April 2024 | ||
| Design Assumptions for Span Tables | 9.3.6 PDF | April 2024 | ||
| Strand Pattern Layout of 24" Thru 36" Deep Beams | 9.3.7 PDF | April 2024 | ||
| Strand Pattern Layout of 39" Thru 48" Deep Beams | 9.3.8 CAD | 9.3.8 PDF | April 2024 | |
| Midspan Section | 9.3.9 CAD | 9.3.9 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 9.3.10 CAD | 9.3.10 PDF | April 2024 | |
| Vertical Section at End of Beam | 9.3.11 CAD | 9.3.11 PDF | April 2024 | |
| Beam Horizontal Section at Abutment | 9.3.12 CAD | 9.3.12 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 9.3.13 CAD | 9.3.13 PDF | April 2024 | |
| Beam Horizontal Section at Pier | 9.3.14 CAD | 9.3.14 PDF | April 2024 | |
| Construction Notes | 9.3.15 CAD | 9.3.15 PDF | April 2024 | January 2025 |
| Designer Notes | 9.3.16 PDF | April 2024 | ||
| Layout of Bearings | 9.3.17 CAD | 9.3.17 PDF | April 2024 | |
| Typical Intermediate Diaphragm | 9.3.18 CAD | 9.3.18 PDF | April 2024 | |
| Vertical Section Thru Intermediate Diaphragm | 9.3.19 CAD | 9.3.19 PDF | April 2024 | |
| Internal Diaphragm (Skew ≤ 30°) | 9.3.20 CAD | 9.3.20 PDF | April 2024 | |
| Internal Diaphragm (Skew > 30°) | 9.3.21 CAD | 9.3.21 PDF | April 2024 | |
| Intermediate Diaphragm with Utility | 9.3.22 CAD | 9.3.22 PDF | April 2024 | |
| Intermediate Diaphragm Sections with Utility | 9.3.23 CAD | 9.3.23 PDF | April 2024 | |
| Utility Bay Details | 9.3.24 CAD | 9.3.24 PDF | April 2024 | |
| Utility Support Details | 9.3.25 CAD | 9.3.25 PDF | April 2024 | |
| Stay-in-Place Form Attachment Detail | 9.3.26 CAD | 9.3.26 PDF | April 2024 | |
| Slab Overhang at Fascia Beam | 9.3.27 CAD | 9.3.27 PDF | April 2024 | |
| Roadway Section at Abutment with Pavement Sawcut | 9.3.28 CAD | 9.3.28 PDF | April 2024 | |
| Roadway Section at Abutment with Asphaltic Bridge Joint | 9.3.29 CAD | 9.3.29 PDF | April 2024 | |
| Vertical Section at End Diaphragm at Abutment | 9.3.30 CAD | 9.3.30 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 9.3.31 CAD | 9.3.31 PDF | April 2024 | |
| Utility Bay Details at Abutment | 9.3.32 CAD | 9.3.32 PDF | April 2024 | |
| Details at Abutment Construction Notes | 9.3.33 CAD | 9.3.33 PDF | April 2024 | |
| Roadway Section at Pier | 9.3.34 CAD | 9.3.34 PDF | April 2024 | |
| Vertical Section at Pier Diaphragm | 9.3.35 CAD | 9.3.35 PDF | April 2024 | |
| Horizontal Section at Pier Diaphragm | 9.3.36 CAD | 9.3.36 PDF | April 2024 | |
| Details at Pier Construction Notes | 9.3.37 CAD | 9.3.37 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
9.4 Miscellaneous Details
Chapter 10: Adjacent Beams with Conventional Deck
Download the complete Chapter 10 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Adjacent Beam Bridges with Conventional Deck Table of Contents (1 of 2) | 10.0.1 PDF | April 2024 | January 2025 | |
| Adjacent Beam Bridges with Conventional Deck Table of Contents (2 of 2) | 10.0.2 PDF | April 2024 | January 2025 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
10.1 Adjacent Prestressed Deck Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 10.1.1 CAD | 10.1.1 PDF | April 2024 | |
| Framing Plan | 10.1.2 CAD | 10.1.2 PDF | April 2024 | |
| Framing Plan Stage Construction | 10.1.3 CAD | 10.1.3 PDF | April 2024 | |
| Dimensions, Properties, and Span Table of 36" Wide Beams | 10.1.4 PDF | April 2024 | ||
| Dimensions, Properties, and Span Table of 48" Wide Beams | 10.1.5 PDF | April 2024 | ||
| Design Assumptions for Span Tables | 10.1.6 PDF | April 2024 | ||
| Strand Pattern Layout of 36" Wide Beams | 10.1.7 PDF | April 2024 | ||
| Strand Pattern Layout of 48" Wide Beams | 10.1.8 PDF | April 2024 | ||
| Shear Key Details | 10.1.9 CAD | 10.1.9 PDF | April 2024 | January 2025 |
| Midspan Section | 10.1.10 CAD | 10.1.10 PDF | April 2024 | |
| Alternate Stirrup Pattern | 10.1.11 CAD | 10.1.11 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 10.1.12 CAD | 10.1.12 PDF | April 2024 | |
| Vertical Section at End of Beam | 10.1.13 CAD | 10.1.13 PDF | April 2024 | |
| Beam Horizontal Section at Abutment | 10.1.14 CAD | 10.1.14 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 10.1.15 CAD | 10.1.15 PDF | April 2024 | |
| Beam Horizontal Section at Pier | 10.1.16 CAD | 10.1.16 PDF | April 2024 | |
| Construction Notes | 10.1.17 CAD | 10.1.17 PDF | April 2024 | January 2025 |
| Designer Notes | 10.1.18 PDF | April 2024 | ||
| Typical Longitudinal Joint Elevation | 10.1.19 CAD | 10.1.19 PDF | April 2024 | |
| Typical Longitudinal Joint Section | 10.1.20 CAD | 10.1.20 PDF | April 2024 | |
| Construction Sequence Notes | 10.1.21 CAD | 10.1.21 PDF | April 2024 | |
| Transverse Tie Anchorage | 10.1.22 CAD | 10.1.22 PDF | April 2024 | January 2025 |
| Layout of Bearings (Spans ≤ 50 Feet) | 10.1.23 CAD | 10.1.23 PDF | April 2024 | |
| Layout of Bearings (Spans > 50 Feet) | 10.1.24 CAD | 10.1.24 PDF | April 2024 | |
| Stage Construction Detail | 10.1.25 CAD | 10.1.25 PDF | April 2024 | |
| Stage Construction Notes | 10.1.26 CAD | 10.1.26 PDF | April 2024 | |
| Sidewalk and Safety Curb Details | 10.1.27 CAD | 10.1.27 PDF | April 2024 | |
| Sidewalk Detail with Utility Bay | 10.1.28 CAD | 10.1.28 PDF | April 2024 | |
| Utility Support Details | 10.1.29 CAD | 10.1.29 PDF | April 2024 | |
| Exterior Utility Supports | 10.1.30 CAD | 10.1.30 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
10.2 Adjacent Prestressed Box Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 10.2.1 CAD | 10.2.1 PDF | April 2024 | |
| Framing Plan | 10.2.2 CAD | 10.2.2 PDF | April 2024 | |
| Framing Plan Stage Construction | 10.2.3 CAD | 10.2.3 PDF | April 2024 | |
| Dimensions, Properties, and Span Table of 36" Wide Beams | 10.2.4 PDF | April 2024 | January 2025 | |
| Dimensions, Properties, and Span Table of 48" Wide Beams | 10.2.5 PDF | April 2024 | ||
| Design Assumptions for Span Tables | 10.2.6 PDF | April 2024 | ||
| Strand Pattern Layout of 24" Thru 36" Deep Beams | 10.2.7 PDF | April 2024 | ||
| Strand Pattern Layout of 39" Thru 48" Deep Beams | 10.2.8 CAD | 10.2.8 PDF | April 2024 | |
| Shear Key Details | 10.2.9 CAD | 10.2.9 PDF | April 2024 | January 2025 |
| Midspan Section | 10.2.10 CAD | 10.2.10 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 10.2.11 CAD | 10.2.11 PDF | April 2024 | |
| Vertical Section at End of Beam | 10.2.12 CAD | 10.2.12 PDF | April 2024 | |
| Beam Horizontal Section at Abutment | 10.2.13 CAD | 10.2.13 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 10.2.14 CAD | 10.2.14 PDF | April 2024 | |
| Beam Horizontal Section at Pier | 10.2.15 CAD | 10.2.15 PDF | April 2024 | |
| Construction Notes | 10.2.16 CAD | 10.2.16 PDF | April 2024 | January 2025 |
| Designer Notes | 10.2.17 PDF | April 2024 | ||
| Typical Longitudinal Joint Elevation | 10.2.18 CAD | 10.2.18 PDF | April 2024 | |
| Typical Longitudinal Joint Section | 10.2.19 CAD | 10.2.19 PDF | April 2024 | |
| Construction Sequence Notes | 10.2.20 CAD | 10.2.20 PDF | April 2024 | |
| Transverse Tie Anchorage | 10.2.21 CAD | 10.2.21 PDF | April 2024 | January 2025 |
| Layout of Bearings | 10.2.22 CAD | 10.2.22 PDF | April 2024 | |
| Stage Construction Detail | 10.2.23 CAD | 10.2.23 PDF | April 2024 | |
| Stage Construction Notes | 10.2.24 CAD | 10.2.24 PDF | April 2024 | |
| Sidewalk and Safety Curb Details | 10.2.25 CAD | 10.2.25 PDF | April 2024 | |
| Sidewalk Detail with Utility Bay | 10.2.26 CAD | 10.2.26 PDF | April 2024 | |
| Utility Support Details | 10.2.27 CAD | 10.2.27 PDF | April 2024 | |
| Exterior Utility Supports | 10.2.28 CAD | 10.2.28 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
10.3 Miscellaneous Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Camber | 10.3.1 CAD | 10.3.1 PDF | April 2024 |
Chapter 11: Prestressed Stringer Bridges with Integral Deck
Download the complete Chapter 11 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Prestressed Stringer Bridges with Integral Deck Table of Contents (1 of 2) | 11.0.1 PDF | April 2024 | January 2025 | |
| Prestressed Stringer Bridges with Integral Deck Table of Contents (2 of 2) | 11.0.2 PDF | April 2024 | January 2025 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
11.1 Prestressed NEDBT Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 11.1.1 CAD | 11.1.1 PDF | April 2024 | |
| Framing Plan | 11.1.2 CAD | 11.1.2 PDF | April 2024 | |
| Dimensions, Properties, and Span Table | 11.1.3 PDF | April 2024 | ||
| Design Assumptions for Span Table | 11.1.4 PDF | April 2024 | January 2025 | |
| Cross Section Options | 11.1.5 PDF | April 2024 | January 2025 | |
| Cross Section Options Designer Notes | 11.1.6 PDF | April 2024 | ||
| Strand Pattern Layout | 11.1.7 CAD | 11.1.7 PDF | April 2024 | |
| Typical Beam Dimensions | 11.1.8 CAD | 11.1.8 PDF | April 2024 | |
| Midspan Section | 11.1.9 CAD | 11.1.9 PDF | April 2024 | |
| End of Beam Plan at Abutment | 11.1.10 CAD | 11.1.10 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 11.1.11 CAD | 11.1.11 PDF | April 2024 | |
| Beam Vertical Section at Abutment | 11.1.12 CAD | 11.1.12 PDF | April 2024 | |
| Horizontal Section at Abutment with Flange Rebar | 11.1.13 CAD | 11.1.13 PDF | April 2024 | |
| Horizontal Section at Abutment Without Flange Rebar | 11.1.14 CAD | 11.1.14 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 11.1.15 CAD | 11.1.15 PDF | April 2024 | |
| Beam Vertical Section at Pier | 11.1.16 CAD | 11.1.16 PDF | April 2024 | |
| Horizontal Section at Pier with Flange Rebar | 11.1.17 CAD | 11.1.17 PDF | April 2024 | |
| Horizontal Section at Pier Without Flange Rebar | 11.1.18 CAD | 11.1.18 PDF | April 2024 | |
| Construction Notes | 11.1.19 CAD | 11.1.19 PDF | April 2024 | January 2025 |
| Designer Notes | 11.1.20 PDF | April 2024 | ||
| Closure Pour Details (Option 1) | 11.1.21 CAD | 11.1.21 PDF | April 2024 | |
| Closure Pour Details (Option 2) | 11.1.22 CAD | 11.1.22 PDF | April 2024 | |
| Closure Pour Details (UHPC Option) | 11.1.23 CAD | 11.1.23 PDF | April 2024 | |
| Closure Pour Construction and Designer Notes | 11.1.24 CAD | 11.1.24 PDF | April 2024 | |
| Exterior Beam Fascia Detail | 11.1.25 CAD | 11.1.25 PDF | April 2024 | |
| Intermediate Diaphragm | 11.1.26 CAD | 11.1.26 PDF | April 2024 | |
| Intermediate Diaphragm Section | 11.1.27 CAD | 11.1.27 PDF | April 2024 | |
| Intermediate Diaphragm with Utility | 11.1.28 CAD | 11.1.28 PDF | April 2024 | |
| Intermediate Diaphragm Section with Utility | 11.1.29 CAD | 11.1.29 PDF | April 2024 | |
| Utility Bay Details (Preferred) | 11.1.30 CAD | 11.1.30 PDF | April 2024 | |
| Utility Bay Details (Alternate) | 11.1.31 CAD | 11.1.31 PDF | April 2024 | |
| Utility Support Details | 11.1.32 CAD | 11.1.32 PDF | April 2024 | |
| Deck Drains Details | 11.1.33 CAD | 11.1.33 PDF | April 2024 | January 2025 |
| Roadway Section at Abutment with Pavement Sawcut | 11.1.34 CAD | 11.1.34 PDF | April 2024 | |
| Vertical Section at End Diaphragm at Abutment | 11.1.35 CAD | 11.1.35 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 11.1.36 CAD | 11.1.36 PDF | April 2024 | |
| Utility Bay Details at Abutment | 11.1.37 CAD | 11.1.37 PDF | April 2024 | |
| Details at Abutment Construction Notes | 11.1.38 CAD | 11.1.38 PDF | April 2024 | |
| Roadway Section at Pier | 11.1.39 CAD | 11.1.39 PDF | April 2024 | |
| Vertical Section at Pier Diaphragm | 11.1.40 CAD | 11.1.40 PDF | April 2024 | |
| Horizontal Section at Pier Diaphragm | 11.1.41 CAD | 11.1.41 PDF | April 2024 | |
| Details at Pier Construction Notes | 11.1.42 CAD | 11.1.42 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
11.2 Prestressed NEXT D Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Cross Section | 11.2.1 CAD | 11.2.1 PDF | April 2024 | |
| Framing Plan | 11.2.2 CAD | 11.2.2 PDF | April 2024 | |
| Dimensions, Properties, and Span Table | 11.2.3 PDF | April 2024 | ||
| Design Assumptions for Span Table | 11.2.4 PDF | April 2024 | January 2025 | |
| Cross Section Options | 11.2.5 PDF | April 2024 | ||
| Cross Section Options Designer Notes | 11.2.6 PDF | April 2024 | ||
| Strand Pattern Layout | 11.2.7 PDF | April 2024 | ||
| Typical Beam Dimensions | 11.2.8 CAD | 11.2.8 PDF | April 2024 | |
| Midspan Section | 11.2.9 CAD | 11.2.9 PDF | April 2024 | |
| End of Beam Plan at Abutment | 11.2.10 CAD | 11.2.10 PDF | April 2024 | |
| Beam Longitudinal Section at Abutment | 11.2.11 CAD | 11.2.11 PDF | April 2024 | |
| Beam Vertical Section at Abutment | 11.2.12 CAD | 11.2.12 PDF | April 2024 | |
| Beam Vertical Section Near Abutment | 11.2.13 CAD | 11.2.13 PDF | April 2024 | |
| Horizontal Section at Abutment with Flange Rebar | 11.2.14 CAD | 11.2.14 PDF | April 2024 | |
| Horizontal Section at Abutment Without Flange Rebar | 11.2.15 CAD | 11.2.15 PDF | April 2024 | |
| Beam Longitudinal Section at Pier | 11.2.16 CAD | 11.2.16 PDF | April 2024 | |
| Beam Vertical Section at Pier | 11.2.17 CAD | 11.2.17 PDF | April 2024 | |
| Beam Vertical Section Near Pier | 11.2.18 CAD | 11.2.18 PDF | April 2024 | |
| Horizontal Section at Pier with Flange Rebar | 11.2.19 CAD | 11.2.19 PDF | April 2024 | |
| Horizontal Section at Pier Without Flange Rebar | 11.2.20 CAD | 11.2.20 PDF | April 2024 | |
| Construction Notes | 11.2.21 CAD | 11.2.21 PDF | April 2024 | |
| Designer Notes | 11.2.22 PDF | April 2024 | ||
| Closure Pour Details | 11.2.23 CAD | 11.2.23 PDF | April 2024 | |
| Closure Pour Details (UHPC Option) | 11.2.24 CAD | 11.2.24 PDF | April 2024 | |
| Closure Pour Construction and Designer Notes | 11.2.25 CAD | 11.2.25 PDF | April 2024 | |
| Exterior Beam Fascia Detail | 11.2.26 CAD | 11.2.26 PDF | April 2024 | |
| Utility Bay Details | 11.2.27 CAD | 11.2.27 PDF | April 2024 | |
| Utility Support Details | 11.2.28 CAD | 11.2.28 PDF | April 2024 | |
| Deck Drain Details | 11.2.29 CAD | 11.2.29 PDF | April 2024 | January 2025 |
| Roadway Section at Abutment with Pavement Sawcut | 11.2.30 CAD | 11.2.30 PDF | April 2024 | |
| Vertical Section at End Diaphragm at Abutment | 11.2.31 CAD | 11.2.31 PDF | April 2024 | |
| Horizontal Section at End Diaphragm at Abutment | 11.2.32 CAD | 11.2.32 PDF | April 2024 | |
| Utility Bay Details at Abutment | 11.2.33 CAD | 11.2.33 PDF | April 2024 | |
| Details at Abutment Construction Notes | 11.2.34 CAD | 11.2.34 PDF | April 2024 | |
| Roadway Section at Pier | 11.2.35 CAD | 11.2.35 PDF | April 2024 | |
| Vertical Section at Pier Diaphragm | 11.2.36 CAD | 11.2.36 PDF | April 2024 | |
| Horizontal Section at Pier Diaphragm | 11.2.37 CAD | 11.2.37 PDF | April 2024 | |
| Details at Pier Construction Notes | 11.2.38 CAD | 11.2.38 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
11.3 Miscellaneous Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Camber | 11.3.1 CAD | 11.3.1 PDF | April 2024 |
Chapter 12: Railings and Barriers
Download the complete Chapter 12 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Railings and Barriers Table of Contents (1 of 2) | 12.0.1 PDF | April 2024 | ||
| Railings and Barriers Table of Contents (2 of 2) | 12.0.2 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.1 General
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Designer Notes | 12.1.1 PDF | April 2024 | January 2025 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.2 CT-MTL2 Railing
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Section Thru Safety Curb Stringers | 12.2.1 CAD | 12.2.1 PDF | April 2024 | |
| Section Thru Safety Curb Next F Beams | 12.2.2 CAD | 12.2.2 PDF | April 2024 | |
| Modifications for Adjacent Beams | 12.2.3 CAD | 12.2.3 PDF | April 2024 | |
| Section Thru Safety Curb NEDBT Beams | 12.2.4 CAD | 12.2.4 PDF | April 2024 | January 2025 |
| Section Thru Safety Curb Next D Beams | 12.2.5 CAD | 12.2.5 PDF | April 2024 | |
| Section Thru Sidewalk Stringers | 12.2.6 CAD | 12.2.6 PDF | April 2024 | |
| Section Thru Sidewalk Next F Beams | 12.2.7 CAD | 12.2.7 PDF | April 2024 | |
| Section Thru Sidewalk Adjacent Beams | 12.2.8 CAD | 12.2.8 PDF | April 2024 | |
| Section Thru Sidewalk NEDBT Beams | 12.2.9 CAD | 12.2.9 PDF | April 2024 | January 2025 |
| Section Thru Sidewalk Next D Beams | 12.2.10 CAD | 12.2.10 PDF | April 2024 | January 2025 |
| Section Thru Railing at Sidewalk | 12.2.11 CAD | 12.2.11 PDF | April 2024 | |
| Exterior Railing Elevation | 12.2.12 CAD | 12.2.12 PDF | April 2024 | |
| Vertical Sections Thru Optional Pilasters | 12.2.13 CAD | 12.2.13 PDF | April 2024 | |
| Pilaster Modifications for Adjacent Beams | 12.2.14 PDF | April 2024 | ||
| Horizontal Sections Thru Optional Pilasters | 12.2.15 CAD | 12.2.15 PDF | April 2024 | |
| Joint Details | 12.2.16 CAD | 12.2.16 PDF | April 2024 | |
| Top of U-Wingwall Details at Safety Curb | 12.2.17 CAD | 12.2.17 PDF | April 2024 | |
| Top of U-Wingwall Details at Sidewalk | 12.2.18 CAD | 12.2.18 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.3 S3-MTL4 Railing
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Section Thru Safety Curb Stringers with HMA W.S. | 12.3.1 CAD | 12.3.1 PDF | April 2024 | |
| Section Thru Safety Curb Stringers with Exposed Deck | 12.3.2 CAD | 12.3.2 PDF | April 2024 | |
| Section Thru Safety Curb Next F Beams with HMA W.S. | 12.3.3 CAD | 12.3.3 PDF | April 2024 | |
| Section Thru Safety Curb Next F Beams with Exposed Deck | 12.3.4 CAD | 12.3.4 PDF | April 2024 | |
| Modifications for Adjacent Beams | 12.3.5 PDF | April 2024 | ||
| Anchor Bolt Pocket Bridges with Exposed Deck | 12.3.6 CAD | 12.3.6 PDF | April 2024 | |
| Section Thru Safety Curb NEDBT Beams | 12.3.7 CAD | 12.3.7 PDF | April 2024 | January 2025 |
| Section Thru Safety Curb Next D Beams | 12.3.8 CAD | 12.3.8 PDF | April 2024 | |
| Section Thru Sidewalk Stringers | 12.3.9 CAD | 12.3.9 PDF | April 2024 | |
| Section Thru Sidewalk Next F Beams with HMA W.S. | 12.3.10 CAD | 12.3.10 PDF | April 2024 | |
| Section Thru Sidewalk Next F Beams with Exposed Deck | 12.3.11 CAD | 12.3.11 PDF | April 2024 | |
| Section Thru Sidewalk Adjacent Beams with HMA W.S. | 12.3.12 CAD | 12.3.12 PDF | April 2024 | |
| Section Thru Sidewalk Adjacent Beams with Exposed Deck | 12.3.13 CAD | 12.3.13 PDF | April 2024 | |
| Section Thru Sidewalk NEDBT Beams | 12.3.14 CAD | 12.3.14 PDF | April 2024 | January 2025 |
| Section Thru Sidewalk Next D Beams | 12.3.15 CAD | 12.3.15 PDF | April 2024 | |
| Top of U-Wingwall Details at Safety Curb | 12.3.16 CAD | 12.3.16 PDF | April 2024 | |
| Top of U-Wingwall Details at Sidewalk | 12.3.17 CAD | 12.3.17 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.4 CP-MTL3 Barrier
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Section Thru Safety Curb Stringers | 12.4.1 CAD | 12.4.1 PDF | April 2024 | |
| Section Thru Safety Curb Next F Beams | 12.4.2 CAD | 12.4.2 PDF | April 2024 | |
| Modifications for Adjacent Beams | 12.4.3 PDF | April 2024 | ||
| Section Thru Safety Curb NEDBT Beams | 12.4.4 CAD | 12.4.4 PDF | April 2024 | January 2025 |
| Section Thru Safety Curb Next D Beams | 12.4.5 CAD | 12.4.5 PDF | April 2024 | |
| Section Thru Sidewalk Stringers | 12.4.6 CAD | 12.4.6 PDF | April 2024 | |
| Section Thru Sidewalk Next F Beams | 12.4.7 CAD | 12.4.7 PDF | April 2024 | |
| Section Thru Sidewalk Adjacent Beams | 12.4.8 CAD | 12.4.8 PDF | April 2024 | |
| Section Thru Sidewalk NEDBT Beams | 12.4.9 CAD | 12.4.9 PDF | April 2024 | January 2025 |
| Section Thru Sidewalk Next D Beams | 12.4.10 CAD | 12.4.10 PDF | April 2024 | |
| Section Thru Barrier at Sidewalk | 12.4.11 CAD | 12.4.11 PDF | April 2024 | |
| Top of U-Wingwall Details at Safety Curb | 12.4.12 CAD | 12.4.12 PDF | April 2024 | |
| Top of U-Wingwall Details at Sidewalk | 12.4.13 CAD | 12.4.13 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.5 CF-MTL5 Barrier
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Section Thru Barrier and Overhang for Stringers | 12.5.1 CAD | 12.5.1 PDF | April 2024 | |
| Section Thru Overhang Next F Beams | 12.5.2 CAD | 12.5.2 PDF | April 2024 | |
| Modifications for Adjacent Beams | 12.5.3 PDF | April 2024 | ||
| Section Thru Overhang NEDBT Beams | 12.5.4 CAD | 12.5.4 PDF | April 2024 | January 2025 |
| Section Thru Overhang Next D Beams | 12.5.5 CAD | 12.5.5 PDF | April 2024 | |
| Top of U-Wingwall Details | 12.5.6 CAD | 12.5.6 PDF | April 2024 | |
| Modifications for Snow Fence | 12.5.7 CAD | 12.5.7 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.6 CF-MTL5 Median Barrier
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Double Face Median Barrier | 12.6.1 CAD | 12.6.1 PDF | April 2024 | |
| Single Face Median Barrier with Joint System | 12.6.2 CAD | 12.6.2 PDF | April 2024 | |
| Single Face Median Barrier with Top Slab | 12.6.3 CAD | 12.6.3 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.7 Face Of Curb Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Sidewalk Curb for Bridges with HMA W.S. | 12.7.1 CAD | 12.7.1 PDF | April 2024 | |
| Sidewalk Curb for Bridges with Exposed Deck | 12.7.2 CAD | 12.7.2 PDF | April 2024 | |
| Safety Curb for CT-MTL2 Railing | 12.7.3 CAD | 12.7.3 PDF | April 2024 | |
| Safety Curb for S3-MTL4 Railing Bridges with HMA W.S. | 12.7.4 CAD | 12.7.4 PDF | April 2024 | |
| Safety Curb for S3-MTL4 Railing Bridges with Exposed Deck | 12.7.5 CAD | 12.7.5 PDF | April 2024 | |
| Safety Curb for CP-MTL3 Barrier | 12.7.6 CAD | 12.7.6 PDF | April 2024 | |
| Safety Curb for Cf-MTL5 Barrier | 12.7.7 CAD | 12.7.7 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.8 Paraffin Joint Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Sidewalk Safety Curb and Median Slabs | 12.8.1 CAD | 12.8.1 PDF | April 2024 | |
| CT-MTL2 Railing and CP-MTL3 Barrier | 12.8.2 CAD | 12.8.2 PDF | April 2024 | |
| CF-MTL5 Barrier and Notes | 12.8.3 CAD | 12.8.3 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
12.9 Median Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Median Details Without Approach Curb | 12.9.1 CAD | 12.9.1 PDF | April 2024 | |
| Median Details with Approach Curb | 12.9.2 CAD | 12.9.2 PDF | April 2024 | |
| Median Curb Detail Without Approach Curb | 12.9.3 CAD | 12.9.3 PDF | April 2024 |
Chapter 13: Roadway Joints
Download the complete Chapter 13 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Roadway Joints Table of Contents | 13.0.1 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
13.1 Pavement Sawcut Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Pavement Sawcut Detail | 13.1.1 CAD | 13.1.1 PDF | April 2024 | |
| Details at End of Deck | 13.1.2 CAD | 13.1.2 PDF | April 2024 | |
| Details for Splayed Wingwalls | 13.1.3 CAD | 13.1.3 PDF | April 2024 | |
| Details for U-Wingwalls | 13.1.4 CAD | 13.1.4 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
13.2 Modified Asphaltic Bridge Joint
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Joint Detail HMA Wearing Surface | 13.2.1 CAD | 13.2.1 PDF | April 2024 | |
| Typical Joint Detail Exposed Concrete Decks | 13.2.2 CAD | 13.2.2 PDF | April 2024 | |
| Construction Notes for HMA Wearing Surface | 13.2.3 CAD | 13.2.3 PDF | April 2024 | |
| Construction Notes for Exposed Concrete Decks | 13.2.4 CAD | 13.2.4 PDF | April 2024 | |
| Joint Details CT-MTL2 Railing | 13.2.5 CAD | 13.2.5 PDF | April 2024 | |
| Joint Details S3-MTL4 Railing | 13.2.6 CAD | 13.2.6 PDF | April 2024 | |
| Joint Details CP-MTL3 Barrier | 13.2.7 CAD | 13.2.7 PDF | April 2024 | |
| Joint Details Cf-MTL5 Barrier | 13.2.8 CAD | 13.2.8 PDF | April 2024 | |
| Joint Detail at Median | 13.2.9 CAD | 13.2.9 PDF | April 2024 | |
| Pre-Compressed Seal Splices | 13.2.10 CAD | 13.2.10 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
13.3 Strip Seal Joint Details
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Typical Joint Detail HMA Wearing Surface | 13.3.1 CAD | 13.3.1 PDF | April 2024 | January 2025 |
| Typical Joint Detail Exposed Concrete Decks | 13.3.2 CAD | 13.3.2 PDF | April 2024 | January 2025 |
| Construction Notes | 13.3.3 CAD | 13.3.3 PDF | April 2024 | |
| S3-MTL4 Railing Plan (Skew ≤ 35°) | 13.3.4 CAD | 13.3.4 PDF | April 2024 | January 2025 |
| S3-MTL4 Railing at Sidewalk Plan (Skew > 35°) | 13.3.5 CAD | 13.3.5 PDF | April 2024 | January 2025 |
| S3-MTL4 Railing at Safety Curb Plan (Skew > 35°) | 13.3.6 CAD | 13.3.6 PDF | April 2024 | January 2025 |
| Railings and Barriers Plan (Skew ≤ 35°) | 13.3.7 CAD | 13.3.7 PDF | April 2024 | January 2025 |
| CP Barrier and CT Railing at Sidewalk Plan (Skew > 35°) | 13.3.8 CAD | 13.3.8 PDF | April 2024 | January 2025 |
| Railings and Barriers at Safety Curb Plan (Skew > 35°) | 13.3.9 CAD | 13.3.9 PDF | April 2024 | January 2025 |
| Transverse Section Through Sidewalk | 13.3.10 CAD | 13.3.10 PDF | April 2024 | January 2025 |
| Transverse Section Through Barriers | 13.3.11 CAD | 13.3.11 PDF | April 2024 | January 2025 |
| Longitudinal Sections CT-MTL2 Railing | 13.3.12 CAD | 13.3.12 PDF | April 2024 | January 2025 |
| Longitudinal Sections S3-MTL4 Railing | 13.3.13 CAD | 13.3.13 PDF | April 2024 | January 2025 |
| Longitudinal Sections CP-MTL3 Barrier | 13.3.14 CAD | 13.3.14 PDF | April 2024 | January 2025 |
| Longitudinal Section Cf-MTL5 Barrier | 13.3.15 CAD | 13.3.15 PDF | April 2024 | January 2025 |
| Typical Vertical Section Thru Railings/Barriers | 13.3.16 CAD | 13.3.16 PDF | April 2024 | January 2025 |
| Splice Details | 13.3.17 CAD | 13.3.17 PDF | April 2024 |
Chapter 14: Bearings
Download the complete Chapter 14 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bearings Table of Contents | 14.0.1 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
14.1 Elastomeric Bearings - Steel Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bearing Plan and Section | 14.1.1 CAD | 14.1.1 PDF | April 2024 | January 2025 |
| Elevation and Bearing Pad Detail | 14.1.2 CAD | 14.1.2 PDF | April 2024 | |
| Construction Notes and Sole Plate Detail | 14.1.3 CAD | 14.1.3 PDF | April 2024 | January 2025 |
| Designer Notes | 14.1.4 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
14.2 Elastomeric Bearings - Concrete Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bearing Plan and Section for Box and Deck Beams | 14.2.1 CAD | 14.2.1 PDF | April 2024 | |
| Bearing Plan and Section for NEBT and NEDBT Beams | 14.2.2 CAD | 14.2.2 PDF | April 2024 | |
| Bearing Plan and Section for Next F and Next D Beams | 14.2.3 CAD | 14.2.3 PDF | April 2024 | |
| Elevation and Bearing Pad Detail | 14.2.4 CAD | 14.2.4 PDF | April 2024 | |
| Construction Notes and Load Plate Detail | 14.2.5 CAD | 14.2.5 PDF | April 2024 | |
| Designer Notes | 14.2.6 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
14.3 Sliding Bearings - Steel Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bearing Plan and Section | 14.3.1 CAD | 14.3.1 PDF | April 2024 | |
| Elevation and Bearing Pad Detail | 14.3.2 CAD | 14.3.2 PDF | April 2024 | |
| Sole Plate Detail | 14.3.3 CAD | 14.3.3 PDF | April 2024 | |
| Construction Notes | 14.3.4 CAD | 14.3.4 PDF | April 2024 | |
| Retainer Plate and Installation Notes | 14.3.5 CAD | 14.3.5 PDF | April 2024 | |
| Designer Notes | 14.3.6 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
14.4 Sliding Bearings - NEBT NEDBT Beams
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Bearing Plan and Section | 14.4.1 CAD | 14.4.1 PDF | April 2024 | |
| Elevation and Bearing Pad Detail | 14.4.2 CAD | 14.4.2 PDF | April 2024 | |
| Sole and Retainer Plate Details | 14.4.3 CAD | 14.4.3 PDF | April 2024 | |
| Construction Notes | 14.4.4 CAD | 14.4.4 PDF | April 2024 | |
| Designer Notes | 14.4.5 PDF | April 2024 |
Chapter 15: Integral Abutments
Download the complete Chapter 15 as PDF.
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Integral Abutments Table of Contents | 15.0.1 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
15.1 Integral Abutments - General
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Terminology | 15.1.1 PDF | April 2024 | ||
| Abutment Plan | 15.1.2 CAD | 15.1.2 PDF | April 2024 | |
| Wingwall Elevation | 15.1.3 CAD | 15.1.3 PDF | April 2024 | |
| Section at Centerline for Stringer Bridges | 15.1.4 CAD | 15.1.4 PDF | April 2024 | |
| Section at Centerline for Integral Deck Bridges | 15.1.5 CAD | 15.1.5 PDF | April 2024 | |
| Abutment Section for Stringer Bridges | 15.1.6 CAD | 15.1.6 PDF | April 2024 | January 2025 |
| Abutment Section for Integral Deck Bridges | 15.1.7 CAD | 15.1.7 PDF | April 2024 | January 2025 |
| Approach Slab Bracket Placement | 15.1.8 PDF | April 2024 | ||
| Asphaltic Bridge Joint Option | 15.1.9 CAD | 15.1.9 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
15.2 Integral Abutments - Piles
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Foundation Plan | 15.2.1 CAD | 15.2.1 PDF | April 2024 | |
| Pile Construction Notes | 15.2.2 CAD | 15.2.2 PDF | April 2024 | |
| Pile Construct/On Notes (Continued) | 15.2.3 CAD | 15.2.3 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
15.3 Integral Abutments - Abutment Reinforcing
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Reinforcement for Stringer Bridges | 15.3.1 CAD | 15.3.1 PDF | April 2024 | |
| Vertical Section for Stringer Bridges | 15.3.2 CAD | 15.3.2 PDF | April 2024 | |
| Pile Cap Section for Stringer Bridges | 15.3.3 CAD | 15.3.3 PDF | April 2024 | |
| Section Thru Diaphragm for Stringer Bridges | 15.3.4 CAD | 15.3.4 PDF | April 2024 | |
| Reinforcement for Integral Deck Bridges | 15.3.5 CAD | 15.3.5 PDF | April 2024 | |
| Vertical Section for Integral Deck Bridges | 15.3.6 CAD | 15.3.6 PDF | April 2024 | |
| Pile Cap Section for Integral Deck Bridges | 15.3.7 CAD | 15.3.7 PDF | April 2024 | |
| Section Thru Diaphragm for Integral Deck Bridges | 15.3.8 CAD | 15.3.8 PDF | April 2024 | |
| Alternative L-Shaped Connection Bars | 15.3.9 PDF | April 2024 | ||
| Integral Wingwall Sections | 15.3.10 CAD | 15.3.10 PDF | April 2024 | |
| Pile Cap and Integral Wingwall Reinforcement Tables | 15.3.11 PDF | April 2024 | ||
| Construction Notes | 15.3.12 CAD | 15.3.12 PDF | April 2024 | |
| Designer Notes | 15.3.13 PDF | April 2024 |
| Description | AutoCAD | Issue Date | Revision Date |
|---|
15.4 Integral Abutments - Miscellaneous
| Description | AutoCAD | Issue Date | Revision Date | |
|---|---|---|---|---|
| Pedestal Details | 15.4.1 CAD | 15.4.1 PDF | April 2024 | |
| Deck Placement Sequence | 15.4.2 CAD | 15.4.2 PDF | April 2024 | |
| Construction Notes | 15.4.3 CAD | 15.4.3 PDF | April 2024 | |
| Abutment Backfill | 15.4.4 CAD | 15.4.4 PDF | April 2024 | |
| Integral Wingwall Movement Joint | 15.4.5 CAD | 15.4.5 PDF | April 2024 | |
| Utility Details at Abutment | 15.4.6 CAD | 15.4.6 PDF | April 2024 | |
| Utility Details for Conduit Bank | 15.4.7 CAD | 15.4.7 PDF | April 2024 |