Massachusetts State Seal An official website of the Commonwealth of Massachusetts Here's how you know

Official websites use .mass.gov

A .mass.gov website belongs to an official government organization in Massachusetts.

Secure websites use HTTPS

A lock icon or https:// means you've safely connected to the official website. Share sensitive information only on official, secure websites.

  • This page, Creating a Multi-Organizational Approval Path and Multi-Organization Approver User , is   offered by
  • Operational Services Division

Creating a Multi-Organizational Approval Path and Multi-Organization Approver User

This Job Aid shows how to create an Approval Path in COMMBUYS with an Approver that works for another organization and how to create a Multi-Organization (Multi-Org) Approver User.

To set up a Multi-Org Approval Path in COMMBUYS, the organizations involved must have a valid Interagency Service Agreement (ISA) or some type of legal authority. The Organization Administrator (OA) from one organization gives access to a user to be an Approver on another organization’s Approval Path and the other OA creates an Approval Path with the user from the other organization.   

Launching COMMBUYS

  1. Launch COMMBUYS
  2. Select Sign In
  3. Type User ID and Password
  4. Select Sign In

Confirming Your Account Role 

  1. Select Account  
  2. Expand the Identified Role panel 
  3. Confirm the Organization Administrator role is selected  

Setting Approval Types  

  1. Select Maintain Agency Approval Paths and Settings on the Organization Administrator home page 
  2. Select Configure Approval Settings from the Approval Path Maintenance page 
  3. Select Cascade Setting in the Maintain Organization Approval Setting section 
  4. Confirm Auto Cascading is selected  
  5. Type the following information in the Maintain Organization Approval Type section  
    1. Create a new Approval Type for the Multi-Org Approval Paths 
Field Name Action Needed 
Approval Type ID Type a unique identifier for the Approval Type; a five-digit alpha-numeric ID. Once set, the Approval Type ID may not be changed.
Description Type a description.
Priority Assign a priority from one to 99. Low numbers are the lowest priority, and high numbers are the highest priority. COMMBUYS will prioritize the sequence in which Approval Paths are triggered based on this priority.
  1. Select Save and Exit 

Adding an Approval Path 

  1. Select Add New Approval Path on the Approval Path Maintenance page 
  2. Navigate through the COMMBUYS tabs menu to add an Approval Path 
    1. COMMBUYS is a tab-based system 
  3. Refer to the Maintaining Approval Paths Job Aid for complete instructions on how to create and maintain an approval path.   

Completing the General Tab 

  1. Complete the following fields in the General tab. Fields marked with an asterisk (*) are required. 
Field Name Action Needed 
Approval Path ID*Type a unique identifier for the Approval Path; a five-digit alpha-numeric ID. Once set, the Approval Path ID may not be changed.
Description*Type a description for the Approval Path
Approval Type*Choose the Approval Type for this Approval Path from the dropdown
Dollar Range*Type the Approval Path dollar amount ranging from $0.00 to $999,999,999,999.99
Roles*Choose the Roles that apply to this Approval Path
Cross OrganizationalSelect to include your default organization and other organizations on this Approval Path. This is for Approvers with Multi-Org approval rights only. Do not use for single Approvers or single Approval Paths.
Additional OrganizationsSelect Edit to add the Additional Organizations if using the ‘Cross Organizational’ field
Approval Doc/Doc Sub Types*Choose the type of documents that will apply to this Approval Path
Approvers*Select the Magnifying Glass to open the User Lookup window. Choose the Multi-Org Approver with the Organization dropdown. An ISA or other legal authority is required to select the appropriate user.
Level*Type “1” to identify the first approver. If additional levels are needed, type “2” for second approver and so on.
  1.  Select Save and Continue 
    1. The Approval Path status is Active  

Completing the UNSPSC Code Tab 

To have certain United Nations Standard Products and Services Codes (UNSPSC) go through their own Approval Path, complete the following:  

  1. Select Add UNSPSC Segment-Family/Class/Commodity  
  2. Select the codes 

Reviewing the Summary Tab 

  1. Select the Summary tab to review the Approval Path 

Creating a Multi-Organization Approver User 

Refer to the Maintaining Agency Users Job Aid to create and update a user’s profile.  

Modifying a User’s Profile 

  1. Select Maintain Agency Users on the Organization Administrator home page 
  2. Select the linked Login ID from the User Maintenance page 
  3. Select Edit from the Roles section  
  4. Select Grant Multi-Org Approval Rights 
  5. Select Save and Exit 
    1. The user may be selected by an OA at a different organization 

Contact

Phone

Available Monday through Friday, 8:00 a.m. - 5:00 p.m.

Help Us Improve Mass.gov  with your feedback

Please do not include personal or contact information.
Feedback