Log in links for this page

CZ-Tip - Dune Building with Beachgrass

Find ways to get to, protect, and enjoy the coast with tips from the Massachusetts Office of Coastal Zone Management (CZM).

If you are looking for some defense against the winds, waves, and flooding that continuously batter and eat away your coastal property, American beachgrass (Ammophila breviligulata) is your plant. This hardy, salt-tolerant, native grass has strong, fast-growing underground rhizomes (root-like underground stems). The rhizomes spread beneath the sand and give rise to many new plants, helping to stabilize sands. Beachgrass also tolerates salt spray and occasional wave overwash, drying winds, low nutrients, heat, and excessive sunlight, and grows well in sandy soils, making it ideal for coastal use. But maybe the best thing about beachgrass is that it helps to develop, build, and maintain dunes.

What Dunes Can Do for You

beachgrass on dune

Dunes provide a physical buffer between the sea and inland areas, helping to protect homes and properties from the damaging effects of waves, wind, storm surges, and flooding. In addition, as waves hit the dune, its sediments move and shift—a process that absorbs wave energy and protects landward areas from the full brunt of the storm. The size of the dune (the height, length, and width) determines the level of protection provided. Dunes are also sand sinks, storing sediments that shift to coastal beaches and nearshore areas when the dunes are eroded during storms. As long as the sand stays in this beach/dune/nearshore system, it continues to protect inland areas and is available to build dunes and beaches in the future.

What You Can Do for Your Dune

Whether you bolster an existing dune or build a dune from scratch, the best way to get started is to plant beachgrass. The dense root system (which runs deep and anchors the plant in place) and the fast-growing rhizomes (which spread beneath the sand and sprout many new plants) allow for quick establishment. And once established, beachgrass literally catches sand—the leaves slow the speed of wind, allowing wind-blown sand to be deposited—and this accumulation helps build up the dune. What's more, the plants thrive on being covered in sand and respond by sending out new shoots and rhizomes to continue the dune-building process. The leaves of the beachgrass also help to stabilize the dune by sheltering underlying sand from wind and rain, while the root systems help bind the sediments. And once beachgrass is established and a dune becomes more stable, other plants are able to gain a foothold, thereby creating greater diversity for wildlife habitat and reducing the potential for a loss of all vegetation to disease or pests. For information on additional beach and dune plantings to create more diversity, see the Massachusetts Office of Coastal Zone Management's (CZM) Coastal Landscaping website.

Though a U.S. Army Corps of Engineers Dune Restoration and Stabilization Study on Nauset Beach concluded that sand fences initially capture sand more rapidly than newly planted beachgrass, once established, beachgrass traps sand at a rate equivalent to sand fencing with multiple lifts (constructing additional fences higher up on the growing dune once the original fences are filled and covered by sand).

Beachgrass Planting Tips

For best results with beachgrass, here are a few useful tips:

Do You Need a Permit?

Because activities on the coast can easily impact natural resources and neighboring properties, a permit may be required by the local Conservation Commission and/or the Massachusetts Department of Environmental Protection under the Wetlands Protection Act (WPA). Projects in rare plant or wildlife habitat, including the breeding and nesting areas of shorebirds, may also require a permit under the Massachusetts Endangered Species Act (MESA). The Massachusetts Division of Fisheries and Wildlife's Natural Heritage and Endangered Species Program (NHESP) can help you determine if your planting project is allowed and what additional requirements may apply. For more detailed information on the regulatory requirements under the WPA and MESA, see CZM’s Coastal Landscaping in Massachusetts - Do You Need a Permit? page.

When to Plant

In Massachusetts, the best time to plant beachgrass is from mid-November through early spring (but not when the ground is frozen). In areas exposed to strong wind or waves, it is best to plant beachgrass in the early spring to reduce the likelihood that it will be washed or blown away in winter storms. Since shorebirds start arriving in the spring to establish territories and conduct courtship and nesting activities, a MESA permit may be required that specifies certain conditions for the project, such as planting beachgrass before April 1 to protect breeding and nesting activities. Additional time-of-year restrictions may be required to protect nesting habitat of protected turtles. See CZM’s Coastal Landscaping in Massachusetts - Do You Need a Permit? page for more information. Beachgrass should not be planted in the dry summer months when it is unlikely to become successfully established.

Location, Location, Location

For beachgrass to thrive, it should be planted in a location with enough wind-blown sand to sustain the plantings and build the dune. Beachgrass tends to grow best when frequently covered by sand, otherwise an unhealthy build-up of thatch occurs that can harbor organisms and insects that make the plants susceptible to disease and drought.

Beachgrass should also be planted as far landward of the high tide line as feasible (most sources recommend at least 100 feet above mean high tide, if space permits). If planted too far seaward, storm tides and waves prevent vegetation from growing and sand from accumulating. Moreover, beachgrass generally grows toward the beach (i.e., toward the source of blowing sand) until the point where saltwater inundation is reached. So the farther back beachgrass is planted, the more room it has to grow, resulting in a bigger (or at least more stable) dune.

Plant Spacing and Depth
beachgrass culms
Beachgrass culms (Photograph courtesy of Cape Coastal Nursery)

Beachgrass culms (the single plant with stem) should be spaced approximately 18 inches apart to ensure successful establishment. In areas that are particularly vulnerable to storms, waves, and washouts, plant culms closer together (e.g., 12 inches apart) to maximize sand build-up and enhance erosion control. Because the plants spread approximately 6 to 10 feet horizontally each year, there is no need to over plant.

You may also want to use a graduated density—planting culms farther apart closer to the shore to allow some sand through and then planting culms closer together through the middle and back of the dune where most sand will be collected. This arrangement mimics the natural landward-to-seaward growth of the dune and helps to prevent the dune from building up too steeply.

Whatever the density, stagger each row of plants to maximize the capture of sand and to avoid creating wind tunnels. Approximately 1-3 culms should be planted per hole at a depth of 8-10 inches. The sand should be firmly pressed down around the culms to secure them in place.

Don't forget that a MESA permit may be required for projects in rare species habitat, which for beachgrass projects is most likely to be shorebird or turtle nesting areas. If beachgrass planting is allowed, certain conditions may apply, such as a requirement to space culms at a density of 2 per 18-24 inches on center to allow enough open sandy areas for shorebird or turtle nesting. NHESP can provide information on the location of protected species habitat and any special design or permitting requirements for your area (see CZM’s Coastal Landscaping in Massachusetts - Do You Need a Permit? page for additional information).


When beachgrass is planted at the appropriate time of year (from fall through spring), there is generally enough precipitation to sustain plantings without the need for supplemental water. If planted in the hot, dry summer months, beachgrass will likely require a temporary supplemental source of water to become established (be sure to use fresh water and not ocean water for irrigation). Temporary irrigation (i.e., for 4-6 months) rather than permanent irrigation is recommended, not only because beachgrass plants do not require watering when established (with the exception of times of drought), but also because excess water from permanent irrigation systems generally exacerbates dune and bank erosion. Excess water on dunes can also reduce soil salinity levels and allow other plants to gain a foothold and out-compete beachgrass. These other plants may not survive for the long term and won't serve the same benefits as beachgrass, so it is best not to get them started.

Temporary irrigation systems, such as aerial heads, soaker hoses, and drip tubing, used on a timer can be used to deliver a sufficient amount of water at desired times (often early morning when less water is lost to the heat of the day). The temporary irrigation lines should be left at the surface (so soils will not be disturbed when the lines are removed) and the system should be removed at a determined time (such as when a local Conservation Commission issues a Certificate of Compliance for the project around year 3).

Various methods to improve water retention and nutrient content in the plants and soils can also help significantly boost the survival rates of plants, such as the application of wetting agents (e.g., Yucca extract), beneficial microbes, and organic compost. A professional may need to be contacted to help determine the most appropriate watering methods and applications that will ensure plant establishment while avoiding impacts to coastal resource areas.


A modest use of fertilizer can encourage plant growth and speed stem and root growth. However, fertilizers can also be washed into coastal waters where they can cause excessive algae growth, reducing oxygen supplies and leading to fish kills. The algae can also produce toxins in the water that pose health problems to people and animals. Be sure to reference the Massachusetts Department of Agricultural Resources Plant Nutrient Management page for statewide fertilizer standards and the University of Massachusetts Extension Program’s Nutrient Management page for requirements that may apply to specific communities.

To avoid these damaging effects, use a high nitrogen, low phosphorus, slow-release fertilizer. (See the U.S. Army Corps of Engineers Dune Grass Fertilization and Maintenance fact sheet [PDF, 337 KB] for details.) One application of fertilizer in the spring within 30 days of planting (but NOT before April 1) and another in late summer/early fall will benefit the growth and establishment of beachgrass. Fertilizer should not be applied too early (before April) because it will wash away before being used by the plants. Fertilizer also is not productive when applied in the mid-summer because the grass tends to slow in growth during this time. Fertilizer may actually cause die-offs of plants if used excessively, so always use sparingly (generally no more than 1 pound of nitrogen for each 1,000 square-foot area that is planted with beachgrass).

Maintenance and Protection

If planted in the right location, at the right time, and under the right conditions, beachgrass plantings are generally good to go for the long term. However, you will want to protect your beachgrass from vehicular and foot traffic, not only at the time of planting, but also on well-established dunes. For all its hardiness, beachgrass cannot withstand trampling and being crushed. And once bare of vegetation, dunes are more vulnerable to erosion and blowouts. So keep your beachgrass safe and your dune stable and you will be duly rewarded with outstanding protection from storms and flooding.

For More Information

The following materials provide details on planting beachgrass and other coastal landscaping topics:

Help Us Improve Mass.gov  with your feedback

Please do not include personal or contact information.