Material Properties
AASHTO Product Evaluation & Audit Solutions Testing data shall demonstrate that the Protective Sealing Compound meets the criteria in accordance with AASHTO M 224.
Submittal and Testing Requirements
AASHTO Product Evaluation & Audit Solutions Testing Requirements
MassDOT Research & Materials (RMS) shall evaluate the data. The following criteria must be met as part of the product submission:
- Testing shall be performed in accordance with the Concrete Coating Systems (CCS) workplan.
MassDOT Requirements and Testing
Manufacturers may request MassDOT evaluation once the AASHTO Product Evaluation & Audit Solutions Testing cycle is complete. The following criteria must be met as part of the product submission:
- AASHTO Product Evaluation & Audit Solutions Testing data shall demonstrate that the Protective Sealing Compound meets the criteria in the table below when tested in accordance with AASHTO M 224.
- A 1-quart sample shall be sent in for FTIR testing to: MassDOT Research and Materials
Attn: QCML
5 Macadam Rd.
Hopkinton, MA 01748
Product Listing, Expiration, and Re-Approval
Once approved, the Protective Sealing Compounds will be listed on the MassDOT QCML. The product shall remain on the approved list for five (5) years unless one of the following occurs:
- If the manufacturer does not have the product reevaluated by AASHTO Product Evaluation & Audit Solutions Testing in accordance with the CCS workplan.
- If the product’s technology changes.
- If the product formulation or technology changes, the manufacturer shall notify MassDOT RMS.
- Manufacturers must resubmit products to AASHTO Product Evaluation & Audit Solutions for testing upon any reformulation of the product.
- MassDOT RMS determines that the product no longer meets the minimum requirements.
A written request for re-approval must be submitted to the Department at least 60 days prior to the expiration date for the product to remain on the QCML.