Part II Introduction
The files needed to create the Construction Drawings/Sketch Plans are posted here in both AutoCAD and PDF formats. The files intended only for viewing and not for the actual construction drawing/sketch plan use are posted here in PDF format only and have only the PDF icon next to their names.
Standard Railings, Screens, Terminuses, and Highway Guardrail Transitions are a standard for all projects and thus, are a part of Part II Standard Details. They are intended for use mainly unchanged. However, certain information, such as detail and section numbers, construction drawing sheet number, etc. may have to be changed as required for a particular set of plans. The Section Symbol, the Subsequent Sheet Block, and the Federal Block are attribute blocks and may be edited by the user at any time as needed.
- Download the Table of Contents for Part II, January 2020 Revision
Chapter 1: Preparation of Plans
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Standard First Sheet | 1.1.1 PDF | Jun-13 | Oct-20 | |
Standard Subsequent Sheets | 1.1.2 PDF | Jun-13 | Oct-20 | |
In-House Design Title Block | 1.1.3 PDF | Jun-13 | Oct-20 | |
Consultant Design Title Block | 1.1.4 PDF | Jun-13 | Oct-20 | |
Miscellaneous Blocks | 1.1.5 PDF | Jun-13 | Oct-20 | |
Traffic Data Block | 1.1.6 PDF | Jun-13 | Oct-20 | |
Seismic Data Block | 1.1.7 PDF | Apr-20 | Oct-20 | |
Hydraulic Data Block | 1.1.8 PDF | Apr-20 | Oct-20 | |
Temporary Water Control Data Block | 1.1.9 PDF | Apr-20 | Oct-20 | |
Revisions to First Sheet | 1.1.10 PDF | Apr-20 | Oct-20 | |
Revisions to Subsequent Sheets | 1.1.11 PDF | Apr-20 | Oct-20 | |
Standard First Sheet | 1.2.1 PDF | Jun-13 | Oct-20 | |
In-House Design Title Block | 1.2.2 PDF | Jun-13 | Oct-20 | |
Consultant Design Title Block | 1.2.3 PDF | Jun-13 | Oct-20 | |
Project Information Block | 1.2.4 PDF | Jun-13 | Oct-20 | |
Standard Title Block | 1.3.1 CAD | 1.3.1 PDF | Jun-13 | Oct-20 |
Sample Plan | 1.3.2 CAD | 1.3.2 PDF | Jun-13 | Oct-20 |
Boring Notes | 1.3.3 CAD | 1.3.3 PDF | Jun-13 | Oct-20 |
Chapter 2: Bridge Geometry
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Limited Access Highway (30' Recovery Area) | 2.1.1 PDF | June-13 | ||
Limited Access Highway (Various Recovery Areas) | 2.1.2 PDF | June-13 | ||
Pier Protection without Design for Impact | 2.1.3 PDF | June-13 | ||
Local Road | 2.1.4 PDF | June-13 | ||
CSX Transportation, Inc. | 2.1.5 PDF | June-13 | ||
MBTA Commuter Rail | 2.1.6 PDF | June-13 | ||
B&M Corporation | 2.1.7 PDF | June-13 | ||
Legal Minimum Railroad Clearances | 2.1.8 PDF | June-13 | ||
Excavation Support Req's - CSX Transportation, Inc. | 2.1.9 PDF | June-13 | ||
Excavation Support Req's - MBTA Commuter Rail | 2.1.10 PDF | June-13 | ||
Excavation Support Req's - B&M Corporation | 2.1.11 PDF | June-13 | ||
Excavation Support Req's - P&W Railroad | 2.1.12 PDF | June-13 | ||
End Span Slopes | 2.1.13 PDF | June-13 | ||
Absolute Clearances for Bridge Inspection Access | 2.1.14 PDF | June-13 | ||
Typical Transverse Section | 2.2.1 PDF | June-13 | ||
U-Wingwall Length | 2.3.1 PDF | June-13 | ||
Riprap Toe Details | 2.4.1 CAD | 2.4.1 PDF | June-13 | |
Riprap Embankment Edge | 2.4.2 CAD | 2.4.2 PDF | June-13 |
Chapter 3: Bridge Substructures
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Typical Plan View | 3.1.1 CAD | 3.1.1 PDF | June-13 | |
Typical Elevation View | 3.1.2 CAD | 3.1.2 PDF | June-13 | |
Typical Stub Abutment Section | 3.1.3 CAD | 3.1.3 PDF | June-13 | |
Typical Gravity Abutment Section | 3.1.4 CAD | 3.1.4 PDF | June-13 | |
Typical Cantilever Abutment Section | 3.1.5 CAD | 3.1.5 PDF | June-13 | |
Construction Notes for Cantilever Abutments | 3.1.6 CAD | 3.1.6 PDF | June-13 | |
Construction Joint Details | 3.1.7 CAD | 3.1.7 PDF | June-13 | |
Vertical Section thru Construction Joint | 3.1.8 CAD | 3.1.8 PDF | June-13 | |
Expansion Joint Details | 3.1.9 CAD | 3.1.9 PDF | June-13 | |
Preformed Filler in Expansion Joints | 3.1.10 CAD | 3.1.10 PDF | June-13 | |
Vertical Section thru Expansion Joint | 3.1.11 CAD | 3.1.11 PDF | June-13 | |
Approach Slab Detail | 3.1.12 PDF | June-13 | ||
Approach Slab, Type I | 3.1.13 CAD | 3.1.13 PDF | June-13 | |
Approach Slab, Type II | 3.1.14 CAD | 3.1.14 PDF | June-13 | |
Approach Slab, Type III | 3.1.15 CAD | 3.1.15 PDF | June-13 | |
Removable Panel for Approach Slab Type I | 3.1.16 CAD | 3.1.16 PDF | June-13 | |
Removable Panel for Approach Slabs Types II & III | 3.1.17 CAD | 3.1.17 PDF | June-13 | |
Typical Gravity Retaining Wall Section | 3.2.1 CAD | 3.2.1 PDF | June-13 | |
Typical Cantilever Retaining Wall Section | 3.2.2 CAD | 3.2.2 PDF | June-13 | |
Construction Notes for Cantilever Retaining Wall | 3.2.3 CAD | 3.2.3 PDF | June-13 | |
Modifications for Gravity U-Wingwall | 3.2.4 PDF | June-13 | ||
Modifications for Cantilever U-Wingwall | 3.2.5 PDF | June-13 | ||
Construction Joint Details | 3.2.6 CAD | 3.2.6 PDF | June-13 | |
Vertical Section thru Construction Joint | 3.2.7 CAD | 3.2.7 PDF | June-13 | |
Expansion Joint Details | 3.2.8 CAD | 3.2.8 PDF | June-13 | |
Preformed Filler in Expansion Joints | 3.2.9 CAD | 3.2.9 PDF | June-13 | |
Vertical Section thru Expansion Joint | 3.2.10 CAD | 3.2.10 PDF | June-13 | |
Catch Basin at U-Back Wingwall | 3.2.11 CAD | 3.2.11 PDF | June-13 | |
Expansion Joint at Step | 3.3.1 CAD | 3.3.1 PDF | June-13 | |
Construction Joint at Step | 3.3.2 CAD | 3.3.2 PDF | June-13 | |
Upper Footing on Lower Footing | 3.3.3 CAD | 3.3.3 PDF | June-13 | |
U-Wingwalls | 3.4.1 CAD | 3.4.1 PDF | June-13 | |
Abutment and Splayed Wingwalls | 3.4.2 CAD | 3.4.2 PDF | June-13 | |
Long Retaining Walls | 3.4.3 CAD | 3.4.3 PDF | June-13 | |
Typical Striation Detail | 3.4.4 CAD | 3.4.4 PDF | June-13 | |
Details at Corners and Joints | 3.4.5 CAD | 3.4.5 PDF | June-13 | |
Detail at Top of Wingwall | 3.4.6 CAD | 3.4.6 PDF | June-13 | |
Miscellaneous Details | 3.4.7 CAD | 3.4.7 PDF | June-13 | |
Typical Plan | 3.5.1 CAD | 3.5.1 PDF | June-13 | |
Typical Transverse Section | 3.5.2 CAD | 3.5.2 PDF | June-13 | |
Typical Column Vertical Section | 3.5.3 CAD | 3.5.3 PDF | June-13 | |
Column Section & Spiral Reinforcement Splice | 3.5.4 CAD | 3.5.4 PDF | June-13 | |
Crash Wall Details | 3.5.5 CAD | 3.5.5 PDF | June-13 | |
Pier Cap Ends | 3.5.6 CAD | 3.5.6 PDF | June-13 | |
Modifications for River Piers | 3.5.7 PDF | June-13 | ||
Pier Cap Placement Sequence | 3.5.8 PDF | June-13 | ||
Aesthetic Pier - Typical Triple Column Elevation (18' ≤ Column Spacing ≤ 22') | 3.5.9 CAD | 3.5.9 PDF | June-13 | |
Aesthetic Pier - Typical Triple Column Elevation (22' < Column Spacing ≤ 27') | 3.5.10 CAD | 3.5.10 PDF | June-13 | |
Aesthetic Pier - Typical Side Elevation | 3.5.11 CAD | 3.5.11 PDF | June-13 | |
Aesthetic Pier - Typical Vertical Column Section | 3.5.12 CAD | 3.5.12 PDF | June-13 | |
Aesthetic Pier - Typical Column Section | 3.5.13 CAD | 3.5.13 PDF | June-13 | |
Aesthetic Pier Cap Ends | 3.5.14 CAD | 3.5.14 PDF | June-13 | |
Limits of Special Slope Paving | 3.6.1 PDF | June-13 | ||
Gravel Borrow for Bridge Foundations | 3.6.2 CAD | 3.6.2 PDF | June-13 | |
Crushed Stone for Bridge Foundations | 3.6.3 CAD | 3.6.3 PDF | June-13 | |
Modifications for Footings on Rock | 3.6.4 PDF | June-13 | ||
Pile Details - Longitudinal Layout | 3.6.5 CAD | 3.6.5 PDF | June-13 | |
Pile Details - Transverse Layout | 3.6.6 CAD | 3.6.6 PDF | June-13 | |
Pipe Pile Splice and Bottom Plate | 3.6.7 CAD | 3.6.7 PDF | June-13 | |
H-Pile Splice Details | 3.6.8 CAD | 3.6.8 PDF | June-13 | |
Drilled Shaft Vertical Section | 3.6.9 CAD | 3.6.9 PDF | June-13 | |
Drilled Shaft Sections and Details | 3.6.10 CAD | 3.6.10 PDF | June-13 | |
Drilled Shaft Construction Notes | 3.6.11 CAD | 3.6.11 PDF | June-13 | |
Cofferdam Details | 3.6.12 CAD | 3.6.12 PDF | June-13 | |
Limits of Gravel Borrow for Backfilling Structures and Pipes | 3.6.13 CAD | 3.6.13 PDF | June-13 | |
Piles in Drilled Holes Construction Notes | 3.6.14 CAD | 3.6.14 PDF | June-13 | |
Typical Abutment Plan | 3.7.1 CAD | 3.7.1 PDF | June-13 | |
Typical Abutment Elevation | 3.7.2 CAD | 3.7.2 PDF | June-13 | |
Horizontal Section - Abutment with U-Wingwall | 3.7.3 CAD | 3.7.3 PDF | June-13 | |
Vertical Section - Abutment with U-Wingwall | 3.7.4 CAD | 3.7.4 PDF | June-13 | |
Horizontal Section at Splayed Wingwall | 3.7.5 CAD | 3.7.5 PDF | June-13 | |
Vertical Section at Splayed Wingwall | 3.7.6 CAD | 3.7.6 PDF | June-13 | |
Intermediate Keeper Block - Plan Section | 3.7.7 CAD | 3.7.7 PDF | June-13 | |
Intermediate Keeper Block - Vertical Section | 3.7.8 CAD | 3.7.8 PDF | June-13 | |
Roadway Section with Pavement Sawcut | 3.7.9 CAD | 3.7.9 PDF | June-13 | |
Sidewalk Section with Pavement Sawcut | 3.7.10 CAD | 3.7.10 PDF | June-13 | |
End of Deck Plan with Pavement Sawcut | 3.7.11 CAD | 3.7.11 PDF | June-13 | |
Exposed Deck and Pavement Sawcut Details | 3.7.12 CAD | 3.7.12 PDF | June-13 | |
Construction Notes for Sections with Pavement Sawcut | 3.7.13 CAD | 3.7.13 PDF | June-13 | |
Roadway Section with Asphaltic Bridge Joint | 3.7.14 CAD | 3.7.14 PDF | June-13 | |
Sidewalk Section with Asphaltic Bridge Joint | 3.7.15 CAD | 3.7.15 PDF | June-13 | |
Exposed Concrete Deck Details & Designer Notes | 3.7.16 CAD | 3.7.16 PDF | June-13 | |
End of Deck Elevation Trough Drain Details | 3.7.17 CAD | 3.7.17 PDF | June-13 | |
Construction Notes for Sections with Asphaltic Bridge Joints | 3.7.18 CAD | 3.7.18 PDF | June-13 | |
Roadway Section with Strip Seal Joint | 3.7.19 CAD | 3.7.19 PDF | June-13 | |
Sidewalk Section with Strip Seal Joint | 3.7.20 CAD | 3.7.20 PDF | June-13 | |
Exposed Deck Roadway Section with Strip Seal Joint | 3.7.21 CAD | 3.7.21 PDF | June-13 | |
Construction Notes for Sections with Strip Seal Joints | 3.7.22 CAD | 3.7.22 PDF | June-13 | |
Horizontal Section - Abutments with U-Wingwall | 3.7.23 CAD | 3.7.23 PDF | June-13 | |
Plastic Waterstop Details | 3.7.24 CAD | 3.7.24 PDF | June-13 | |
Elevation at U-Wingwall for S3-TL4, CT-TL2 and CP-PL2 at Sidewalk and S3-TL4 at Safety Curb | 3.8.1 CAD | 3.8.1 PDF | June-13 | |
Elevation at U-Wingwall for CT-TL2 and CP-PL2 at Safety Curb and CF Barriers | 3.8.2 CAD | 3.8.2 PDF | June-13 | |
Construction and Designer Notes | 3.8.3 CAD | 3.8.3 PDF | June-13 | |
Vertical Sections at U-Wingwall for S3-TL4, CT-TL2, CP-PL2 at Sidewalk and S3-TL4 at Safety Curb | 3.8.4 CAD | 3.8.4 PDF | June-13 | |
Horizontal Section | 3.8.5 CAD | 3.8.5 PDF | June-13 | |
Vertical Sections at U-Wingwall for CT-TL2 and CP-PL2 Barriers at Safety Curb | 3.8.6 CAD | 3.8.6 PDF | June-13 | |
Vertical Sections at U-Wingwall for CF Barriers | 3.8.7 CAD | 3.8.7 PDF | June-13 | |
Plan at Splayed Wingwall | 3.8.8 CAD | 3.8.8 PDF | June-13 | |
Elevation at Splayed Wingwall | 3.8.9 CAD | 3.8.9 PDF | June-13 | |
Horizontal Section at Splayed Wingwall | 3.8.10 CAD | 3.8.10 PDF | June-13 | |
Grading Requirements - Plan | 3.8.11 CAD | 3.8.11 PDF | June-13 | |
Grading Requirements - Elevation | 3.8.12 CAD | 3.8.12 PDF | June-13 | |
Grading Requirements - Vertical Section for S3-TL4 Railing, CT-TL2 and CP-PL2 Barriers at Sidewalk | 3.8.13 CAD | 3.8.13 PDF | June-13 | |
Grading Requirements - Vertical Section for S3-TL4 at Safety Curb | 3.8.14 CAD | 3.8.14 PDF | June-13 | |
Grading Requirements - Vertical Section for CT-TL2 and CP-PL2 Barriers at Safety Curb | 3.8.15 CAD | 3.8.15 PDF | June-13 | |
Grading Requirements - Vertical Section for CF Barriers | 3.8.16 CAD | 3.8.16 PDF | June-13 | |
Bridge Seat Elevations - Precast Stringer Bridges | 3.9.1 PDF | June-13 | ||
Additional Considerations - Spread Box Beam Bridges | 3.9.2 PDF | June-13 | ||
Bridge Seat Elevations for Steel Beam Bridges | 3.9.3 PDF | June-13 | ||
Adjustments for Uneven Bridge Seat Elevations | 3.9.4 PDF | June-13 |
Chapter 4: Adjacent Beam Bridges
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Framing Plan | 4.1.1 CAD | 4.1.1 PDF | June-13 | |
Framing Plan - Stage Construction | 4.1.2 CAD | 4.1.2 PDF | June-13 | |
Standard 36" Wide Beams | 4.1.3 PDF | June-13 | ||
Standard 48" Wide Beams | 4.1.4 PDF | June-13 | ||
Standard Strand Location - 36" Wide Beams | 4.1.5 PDF | June-13 | ||
Standard Strand Location - 48" Wide Beams | 4.1.6 PDF | June-13 | ||
Prestress Notes | 4.1.7 CAD | 4.1.7 PDF | June-13 | |
Shear Key Details | 4.1.8 CAD | 4.1.8 PDF | June-13 | |
Typical Midspan Section | 4.1.9 CAD | 4.1.9 PDF | June-13 | |
Alternate Stirrup Pattern | 4.1.10 CAD | 4.1.10 PDF | June-13 | |
Typical End of Beam Section | 4.1.11 CAD | 4.1.11 PDF | June-13 | |
Typical End of Beam Plan | 4.1.12 CAD | 4.1.12 PDF | June-13 | |
Longitudinal Section | 4.1.13 CAD | 4.1.13 PDF | June-13 | |
Typical Longitudinal Joint Elevation | 4.1.14 CAD | 4.1.14 PDF | June-13 | |
Typical Longitudinal Joint Section | 4.1.15 CAD | 4.1.15 PDF | June-13 | |
Construction Sequence Notes | 4.1.16 CAD | 4.1.16 PDF | June-13 | |
Transverse Tie Anchorage | 4.1.17 CAD | 4.1.17 PDF | June-13 | |
Layout of Bearings - Spans ≤ 50' | 4.1.18 CAD | 4.1.18 PDF | June-13 | |
Layout of Bearings - Spans > 50' | 4.1.19 CAD | 4.1.19 PDF | June-13 | |
Stage Construction Detail | 4.1.20 CAD | 4.1.20 PDF | June-13 | |
Stage Construction Notes | 4.1.21 CAD | 4.1.21 PDF | June-13 | |
Theoretical Deck Slab Thickness Table | 4.1.22 CAD | 4.1.22 PDF | June-13 | |
Framing Plan | 4.2.1 CAD | 4.2.1 PDF | June-13 | |
Framing Plan - Stage Construction | 4.2.2 CAD | 4.2.2 PDF | June-13 | |
Standard 36" Wide Beams | 4.2.3 PDF | June-13 | ||
Standard 48" Wide Beams | 4.2.4 PDF | June-13 | ||
Standard Strand Location - 24" thru 36" Deep Beams | 4.2.5 PDF | June-13 | ||
Standard Strand Location - 39" thru 48" Deep Beams | 4.2.6 PDF | June-13 | ||
Prestress Notes | 4.2.7 CAD | 4.2.7 PDF | June-13 | |
Shear Key Details | 4.2.8 CAD | 4.2.8 PDF | June-13 | |
Typical Midspan Section | 4.2.9 CAD | 4.2.9 PDF | June-13 | |
Typical End of Beam Section | 4.2.10 CAD | 4.2.10 PDF | June-13 | |
Typical End of Beam Plan | 4.2.11 CAD | 4.2.11 PDF | June-13 | |
Longitudinal Section | 4.2.12 CAD | 4.2.12 PDF | June-13 | |
Transverse Tie Locations | 4.2.13 PDF | June-13 | ||
Typical Longitudinal Joint Elevation | 4.2.14 CAD | 4.2.14 PDF | June-13 | |
Typical Longitudinal Joint Section | 4.2.15 CAD | 4.2.15 PDF | June-13 | |
Construction Sequence Notes | 4.2.16 CAD | 4.2.16 PDF | June-13 | |
Transverse Tie Anchorage | 4.2.17 CAD | 4.2.17 PDF | June-13 | |
Typical Layout of Bearings | 4.2.18 CAD | 4.2.18 PDF | June-13 | |
Stage Construction Detail | 4.2.19 CAD | 4.2.19 PDF | June-13 | |
Stage Construction Notes | 4.2.20 CAD | 4.2.20 PDF | June-13 | |
Theoretical Deck Slab Thickness Table | 4.2.21 CAD | 4.2.21 PDF | June-13 | |
Sidewalk & Safety Curb Details for Deck Beams | 4.3.1 CAD | 4.3.1 PDF | June-13 | |
Sidewalk & Safety Curb Details for Box Beams | 4.3.2 CAD | 4.3.2 PDF | June-13 | |
Sidewalk Detail with Utility Bay for Deck Beams | 4.3.3 CAD | 4.3.3 PDF | June-13 | |
Sidewalk Detail with Utility Bay for Box Beams | 4.3.4 CAD | 4.3.4 PDF | June-13 | |
Exterior Utility Supports for Deck Beams | 4.3.5 CAD | 4.3.5 PDF | June-13 | |
Exterior Utility Supports for Box Beams | 4.3.6 CAD | 4.3.6 PDF | June-13 | |
Typical Utility Support Details | 4.3.7 CAD | 4.3.7 PDF | June-13 | |
Abutment Plan | 4.4.1 CAD | 4.4.1 PDF | June-13 | |
Abutment Elevation | 4.4.2 CAD | 4.4.2 PDF | June-13 | |
Detail at U-Wingwall Corner | 4.4.3 CAD | 4.4.3 PDF | June-13 | |
Plan Section at Abutment End - U-Wingwalls | 4.4.4 CAD | 4.4.4 PDF | June-13 | |
Section at Abutment End - U-Wingwalls | 4.4.5 CAD | 4.4.5 PDF | June-13 | |
Plan Section at Utility Bay Keeper Block | 4.4.6 CAD | 4.4.6 PDF | June-13 | |
Plan Section at Abutment End - Splayed Wingwalls | 4.4.7 CAD | 4.4.7 PDF | June-13 | |
Section at Abutment End - Splayed Wingwalls | 4.4.8 CAD | 4.4.8 PDF | June-13 | |
Roadway Section for 12" & 15" Deep Deck Beams | 4.4.9 CAD | 4.4.9 PDF | June-13 | |
Roadway Section for 18" & 21" Deep Deck Beams | 4.4.10 CAD | 4.4.10 PDF | June-13 | |
Roadway Section - Box Beams | 4.4.11 CAD | 4.4.11 PDF | June-13 | |
Construction Notes for Abutment Details | 4.4.12 CAD | 4.4.12 PDF | June-13 | |
Pavement Sawcut Detail | 4.4.13 CAD | 4.4.13 PDF | June-13 | |
Sidewalk Section - Deck and Box Beams | 4.4.14 CAD | 4.4.14 PDF | June-13 | |
Utility Bay Section - Deck and Box Beams | 4.4.15 CAD | 4.4.15 PDF | June-13 | |
Utility thru U-Wingwall | 4.4.16 CAD | 4.4.16 PDF | June-13 | |
Utility thru Splayed Wingwall | 4.4.17 CAD | 4.4.17 PDF | June-13 | |
Typical Plan of Pier | 4.5.1 CAD | 4.5.1 PDF | June-13 | |
Typical Transverse Section of Pier | 4.5.2 CAD | 4.5.2 PDF | June-13 | |
Plan Section at Pier End without Utility Bay | 4.5.3 CAD | 4.5.3 PDF | June-13 | |
Vertical Section at Pier End without Utility Bay | 4.5.4 CAD | 4.5.4 PDF | June-13 | |
Plan Section of Pier at Utility Bay | 4.5.5 CAD | 4.5.5 PDF | June-13 | |
Vertical Section of Pier at Utility Bay | 4.5.6 CAD | 4.5.6 PDF | June-13 | |
Plan Section at Pier End with Utility Bay | 4.5.7 CAD | 4.5.7 PDF | June-13 | |
Vertical Section at Pier End with Utility Bay | 4.5.8 CAD | 4.5.8 PDF | June-13 | |
Details over Pier for Deck and Box Beams | 4.5.9 CAD | 4.5.9 PDF | June-13 |
Chapter 5: Stringer Bridges - Steel Beams
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Typical Framing Plan | 5.1.1 CAD | 5.1.1 PDF | June-13 | |
Cover Plate Details | 5.1.2 CAD | 5.1.2 PDF | June-13 | |
Intermediate Diaphragm Details | 5.1.3 CAD | 5.1.3 PDF | June-13 | |
End Diaphragm Details - Elevation View and Section 1 | 5.1.4 CAD | 5.1.4 PDF | June-13 | |
End Diaphragm Details - Section 2 | 5.1.5 CAD | 5.1.5 PDF | June-13 | |
Utility Support Details - Intermediate Diaphragms | 5.1.6 CAD | 5.1.6 PDF | June-13 | |
Utility Support Details - Diaphragms under Sidewalk | 5.1.7 CAD | 5.1.7 PDF | June-13 | |
Utility Support Details between Diaphragms | 5.1.8 CAD | 5.1.8 PDF | June-13 | |
Clip Detail for Diaphragm Connection Plates | 5.1.9 CAD | 5.1.9 PDF | June-13 | |
Bolted Field Splice Details | 5.1.10 CAD | 5.1.10 PDF | June-13 | |
Typical Framing Plan | 5.2.1 CAD | 5.2.1 PDF | June-13 | |
Designer Notes | 5.2.2 PDF | June-13 | ||
Typical Welded Girder Elevation | 5.2.3 CAD | 5.2.3 PDF | June-13 | |
Stiffener Attachment Details | 5.2.4 CAD | 5.2.4 PDF | June-13 | |
Clip Detail for Transverse Plates | 5.2.5 CAD | 5.2.5 PDF | June-13 | |
Parabolic Haunch Girders | 5.2.6 CAD | 5.2.6 PDF | June-13 | |
End Cross Frame Details | 5.2.7 CAD | 5.2.7 PDF | June-13 | |
End Cross Frame Details - Section 1 | 5.2.8 CAD | 5.2.8 PDF | June-13 | |
Intermediate Cross Frame Details | 5.2.9 CAD | 5.2.9 PDF | June-13 | |
Utility Support Details at Cross Frames | 5.2.10 CAD | 5.2.10 PDF | June-13 | |
Utility Support Details Between Cross Frames | 5.2.11 CAD | 5.2.11 PDF | June-13 | |
Bolted Field Splice Details | 5.2.12 CAD | 5.2.12 PDF | June-13 | |
Typical Framing Plan | 5.3.1 CAD | 5.3.1 PDF | June-13 | |
Typical Geometry | 5.3.2 CAD | 5.3.2 PDF | June-13 | |
Fracture Critical Members | 5.3.3 CAD | 5.3.3 PDF | June-13 | |
Bolted Field Splice Details | 5.3.4 CAD | 5.3.4 PDF | June-13 | |
Interior Intermediate Cross Frame Details | 5.3.5 CAD | 5.3.5 PDF | June-13 | |
Interior Intermediate Cross Frame Connection Details at Top | 5.3.6 CAD | 5.3.6 PDF | June-13 | |
Interior Intermediate Cross Frame Connection Details at Bottom | 5.3.7 CAD | 5.3.7 PDF | June-13 | |
Exterior Intermediate Cross Frame | 5.3.8 CAD | 5.3.8 PDF | June-13 | |
End Cross Frame | 5.3.9 CAD | 5.3.9 PDF | June-13 | |
End Cross Frame Connection Details | 5.3.10 CAD | 5.3.10 PDF | June-13 | |
Longitudinal Stiffener Details | 5.3.11 CAD | 5.3.11 PDF | June-13 | |
End Cross Frame Access Hatch Details | 5.3.12 CAD | 5.3.12 PDF | June-13 | |
Inspection Access Hatch Details | 5.3.13 CAD | 5.3.13 PDF | June-13 | |
Inspection Access Hatch Details and Notes | 5.3.14 CAD | 5.3.14 PDF | June-13 | |
Drain Hole Details | 5.3.15 CAD | 5.3.15 PDF | June-13 | |
Interior Painting Requirements | 5.3.16 CAD | 5.3.16 PDF | June-13 | |
Roadway Section with Pavement Sawcut | 5.4.1 CAD | 5.4.1 PDF | June-13 | |
Roadway Section with Asphaltic Bridge Joint | 5.4.2 CAD | 5.4.2 PDF | June-13 | |
End Diaphragm Plan | 5.4.3 CAD | 5.4.3 PDF | June-13 | |
End Diaphragm Elevation | 5.4.4 CAD | 5.4.4 PDF | June-13 | |
Plan of Pier Cap for Continuous Beams | 5.5.1 CAD | 5.5.1 PDF | June-13 | |
Section thru Pier Cap | 5.5.2 CAD | 5.5.2 PDF | June-13 | |
Plan of Keeper Block | 5.5.3 CAD | 5.5.3 PDF | June-13 | |
Keeper Block Vertical Section | 5.5.4 CAD | 5.5.4 PDF | June-13 | |
Camber | 5.6.1 CAD | 5.6.1 PDF | June-13 | |
Stud Shear Connectors | 5.6.2 CAD | 5.6.2 PDF | June-13 | |
Drip Bar Detail - Weathering Steel Only | 5.6.3 CAD | 5.6.3 PDF | June-13 | |
Paint Limits for Weathering Steel Bridges | 5.6.4 CAD | 5.6.4 PDF | June-13 |
Chapter 6: Stringer Bridges - Concrete Beams
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Framing Plan (Skew ≤ 30 degrees) | 6.1.1 CAD | 6.1.1 PDF | June-13 | |
Framing Plan (Skew > 30 degrees) | 6.1.2 CAD | 6.1.2 PDF | June-13 | |
Standard NEBT Series Typical Dimensions | 6.1.3 PDF | June-13 | ||
Strand Locations and Hold Down Details | 6.1.4 PDF | June-13 | ||
Typical Section | 6.1.5 CAD | 6.1.5 PDF | June-13 | |
Longitudinal Section | 6.1.6 CAD | 6.1.6 PDF | June-13 | |
Prestress Notes | 6.1.7 CAD | 6.1.7 PDF | June-13 | |
Stay-in-Place Form Attachment Detail | 6.1.8 CAD | 6.1.8 PDF | June-13 | |
Slab Overhang at Fascia Beam | 6.1.9 CAD | 6.1.9 PDF | June-13 | |
Haunch Detail | 6.1.10 CAD | 6.1.10 PDF | June-13 | |
Intermediate Diaphragm Detail (Skew ≤ 30 degrees) | 6.1.11 CAD | 6.1.11 PDF | June-13 | |
Intermediate Diaphragm Detail (Skew > 30 degrees) | 6.1.12 CAD | 6.1.12 PDF | June-13 | |
Intermediate Diaphragm - Typical Section | 6.1.13 CAD | 6.1.13 PDF | June-13 | |
Intermediate Diaphragm Detail with Utility | 6.1.14 CAD | 6.1.14 PDF | June-13 | |
Intermediate Diaphragm Section with Utility | 6.1.15 CAD | 6.1.15 PDF | June-13 | |
Utility Bay Details (Preferred) | 6.1.16 CAD | 6.1.16 PDF | June-13 | |
Utility Bay Details (Alternate) | 6.1.17 CAD | 6.1.17 PDF | June-13 | |
Utility Support Details | 6.1.18 CAD | 6.1.18 PDF | June-13 | |
Framing Plan (Skew ≤ 30 degrees) | 6.2.1 CAD | 6.2.1 PDF | June-13 | |
Framing Plan (Skew > 30 degrees) | 6.2.2 CAD | 6.2.2 PDF | June-13 | |
Standard 36" Wide Beams | 6.2.3 PDF | June-13 | ||
Standard 48" Wide Beams | 6.2.4 PDF | June-13 | ||
Midspan Section | 6.2.5 CAD | 6.2.5 PDF | June-13 | |
End of Beam Section | 6.2.6 CAD | 6.2.6 PDF | June-13 | |
Beam Plan and Elevation | 6.2.7 CAD | 6.2.7 PDF | June-13 | |
Construction and Designer Notes | 6.2.8 CAD | 6.2.8 PDF | June-13 | |
Prestress Notes | 6.2.9 CAD | 6.2.9 PDF | June-13 | |
Stay-in-Place Form Attachment Detail | 6.2.10 CAD | 6.2.10 PDF | June-13 | |
Slab Overhang at Fascia Beam | 6.2.11 CAD | 6.2.11 PDF | June-13 | |
Haunch Detail | 6.2.12 CAD | 6.2.12 PDF | June-13 | |
Intermediate Diaphragm | 6.2.13 CAD | 6.2.13 PDF | June-13 | |
Intermediate Diaphragm Section | 6.2.14 CAD | 6.2.14 PDF | June-13 | |
Internal Diaphragm (Skew ≤ 30 degrees) | 6.2.15 CAD | 6.2.15 PDF | June-13 | |
Internal Diaphragm (Skew > 30 degrees) | 6.2.16 CAD | 6.2.16 PDF | June-13 | |
Intermediate Diaphragm with Utility | 6.2.17 CAD | 6.2.17 PDF | June-13 | |
Intermediate Diaphragm Sections with Utility | 6.2.18 CAD | 6.2.18 PDF | June-13 | |
Utility Support Details | 6.2.19 CAD | 6.2.19 PDF | June-13 | |
Utility Support Notes | 6.2.20 CAD | 6.2.20 PDF | June-13 | |
Framing Plan | 6.3.1 CAD | 6.3.1 PDF | June-13 | |
Standard NEXT F Beam Series - Typical Dimensions | 6.3.2 CAD | 6.3.2 PDF | June-13 | |
NEXT F Beam Series - Properties and Approximate Maximum Span Lengths | 6.3.3 CAD | 6.3.3 PDF | June-13 | |
NEXT F Beam Series - Design Assumptions | 6.3.4 CAD | 6.3.4 PDF | June-13 | |
Maximum Number of Strands and Strand Locations | 6.3.5 CAD | 6.3.5 PDF | June-13 | |
Prestress Notes | 6.3.6 CAD | 6.3.6 PDF | June-13 | |
Typical Beam Section | 6.3.7 CAD | 6.3.7 PDF | June-13 | |
End of Beam Plan | 6.3.8 CAD | 6.3.8 PDF | June-13 | |
End of Beam - Longitudinal Section | 6.3.9 CAD | 6.3.9 PDF | June-13 | |
End of Beam - Horizontal and Vertical Sections | 6.3.10 CAD | 6.3.10 PDF | June-13 | |
Utility Support Details | 6.3.11 CAD | 6.3.11 PDF | June-13 | |
NEBT's - Roadway Section with Pavement Sawcut | 6.4.1 CAD | 6.4.1 PDF | June-13 | |
NEBT's - Roadway Section with Asphaltic Bridge Joint | 6.4.2 CAD | 6.4.2 PDF | June-13 | |
NEBT's - End Diaphragm Plan | 6.4.3 CAD | 6.4.3 PDF | June-13 | |
NEBT's - End Diaphragm Elevation | 6.4.4 CAD | 6.4.4 PDF | June-13 | |
BOXES - Roadway Section with Pavement Sawcut | 6.4.5 CAD | 6.4.5 PDF | June-13 | |
BOXES - Roadway Section with Asphaltic Bridge Joint | 6.4.6 CAD | 6.4.6 PDF | June-13 | |
BOXES - End Diaphragm Plan | 6.4.7 CAD | 6.4.7 PDF | June-13 | |
BOXES - End Diaphragm Elevation | 6.4.8 CAD | 6.4.8 PDF | June-13 | |
NEXT F Beams - Roadway Section with Pavement Sawcut | 6.4.9 CAD | 6.4.9 PDF | June-13 | |
NEXT F Beams - Horizontal Section thru End Diaphragm | 6.4.10 CAD | 6.4.10 PDF | June-13 | |
NEXT F Beams - Vertical Section thru End Diaphragm | 6.4.11 CAD | 6.4.11 PDF | June-13 | |
Plan of Pier Cap | 6.5.1 CAD | 6.5.1 PDF | June-13 | |
Section thru Pier Cap | 6.5.2 CAD | 6.5.2 PDF | June-13 | |
Plan Section of End Keeper Block | 6.5.3 CAD | 6.5.3 PDF | June-13 | |
Vertical Section of End Keeper Block | 6.5.4 CAD | 6.5.4 PDF | June-13 | |
Intermediate Keeper Block - Plan Section | 6.5.5 CAD | 6.5.5 PDF | June-13 | |
Intermediate Keeper Block - Vertical Section | 6.5.6 CAD | 6.5.6 PDF | June-13 | |
Details over Pier for NEBT Beams | 6.5.7 CAD | 6.5.7 PDF | June-13 | |
Pier Diaphragm Plan for NEBT Beams | 6.5.8 CAD | 6.5.8 PDF | June-13 | |
Pier Diaphragm Section for NEBT Beams | 6.5.9 CAD | 6.5.9 PDF | June-13 | |
Details over Pier Notes for NEBT Beams | 6.5.10 CAD | 6.5.10 PDF | June-13 | |
Details over Pier for Box Beams | 6.5.11 CAD | 6.5.11 PDF | June-13 | |
Pier Diaphragm Plan for Box Beams | 6.5.12 CAD | 6.5.12 PDF | June-13 | |
Pier Diaphragm Section for Box Beams | 6.5.13 CAD | 6.5.13 PDF | June-13 | |
Details over Pier Notes for Box Beams | 6.5.14 CAD | 6.5.14 PDF | June-13 | |
Details over Pier for NEXT F Beams | 6.5.15 CAD | 6.5.15 PDF | June-13 | |
NEXT F Beams - Horizontal Section thru Pier Diaphragm | 6.5.16 CAD | 6.5.16 PDF | June-13 | |
NEXT F Beams - Vertical Section thru Pier Diaphragm | 6.5.17 CAD | 6.5.17 PDF | June-13 | |
Utility Bay Details for NEBT Beams | 6.5.18 CAD | 6.5.18 PDF | June-13 | |
Section thru Utility Bay for NEBT Beams | 6.5.19 CAD | 6.5.19 PDF | June-13 | |
Utility Bay Details for Box Beams | 6.5.20 CAD | 6.5.20 PDF | June-13 | |
Section thru Utility Bay for Box Beams | 6.5.21 CAD | 6.5.21 PDF | June-13 |
Chapter 7: Deck Details
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Typical Deck Reinforcement | 7.1.1 CAD | 7.1.1 PDF | June-13 | |
Deck Slab Reinforcement - Steel Stringers | 7.1.2 PDF | June-13 | ||
Deck Slab Reinforcement - Precast Concrete NEBT and Box Beams | 7.1.3 PDF | June-13 | ||
Deck Slab Reinforcement - Design Assumptions | 7.1.4 PDF | June-13 | ||
Additional Overhang Reinforcement - CT-TL2 Barrier | 7.1.5 PDF | June-13 | ||
Additional Overhang Reinforcement - S3-TL4 Railing | 7.1.6 PDF | June-13 | ||
Additional Overhang Reinforcement - CP-PL2 Barrier | 7.1.7 PDF | June-13 | ||
Additional Overhang Reinforcement - CF-PL2 Barrier | 7.1.8 PDF | June-13 | ||
Additional Overhang Reinforcement - CF-PL3 Barrier | 7.1.9 PDF | June-13 | ||
Additional Overhang Reinforcement - Design Assumptions | 7.1.10 PDF | June-13 | ||
Reinforcement Details | 7.1.11 CAD | 7.1.11 PDF | June-13 | |
Median Details without Approach Curb | 7.1.12 CAD | 7.1.12 PDF | June-13 | |
Median Curb Detail without Approach Curb | 7.1.13 CAD | 7.1.13 PDF | June-13 | |
Median Details with Approach Curb | 7.1.14 CAD | 7.1.14 PDF | June-13 | |
Construction Joints | 7.1.15 CAD | 7.1.15 PDF | June-13 | |
Construction Joint Notes | 7.1.16 CAD | 7.1.16 PDF | June-13 | |
Top of Form Details | 7.1.17 CAD | 7.1.17 PDF | June-13 | |
Bridge Deck Wearing Surfaces | 7.1.18 PDF | June-13 | ||
Details | 7.2.1 CAD | 7.2.1 PDF | June-13 | |
S.I.P. Form Notes | 7.2.2 CAD | 7.2.2 PDF | June-13 | |
Details for Curved Girders | 7.2.3 CAD | 7.2.3 PDF | June-13 | |
S.I.P. Form Notes for Curved Girders | 7.2.4 CAD | 7.2.4 PDF | June-13 | |
Deck Drain Pipes | 7.3.1 CAD | 7.3.1 PDF | June-13 | |
Scupper Sections | 7.3.2 CAD | 7.3.2 PDF | June-13 | |
Scupper Details | 7.3.3 CAD | 7.3.3 PDF | June-13 |
Chapter 8: Bridge Bearings
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Elastomeric Bearing Pad Standard Detail | 8.1.1 CAD | 8.1.1 PDF | June-13 | |
Elastomeric Bearing Pad Assembly Plan | 8.1.2 CAD | 8.1.2 PDF | June-13 | |
Standard Bearing Assembly - Section and Elevation | 8.1.3 CAD | 8.1.3 PDF | June-13 | |
Bearing with Anchor Bolts - Plan | 8.1.4 CAD | 8.1.4 PDF | June-13 | |
Bearing with Anchor Bolts - Section and Elevation | 8.1.5 CAD | 8.1.5 PDF | June-13 | |
Sole Plate Detail and Bearing Notes | 8.1.6 CAD | 8.1.6 PDF | June-13 | |
Elastomeric Bearing Pad - Standard Detail | 8.2.1 CAD | 8.2.1 PDF | June-13 | |
Elastomeric Bearing Pad - Designer Notes | 8.2.2 PDF | June-13 | ||
Elastomeric Bearing Pad - Plan for Box and NEBT Beams | 8.2.3 CAD | 8.2.3 PDF | June-13 | |
Elastomeric Bearing Pad - Vertical Section for Box and NEBT Beams | 8.2.4 CAD | 8.2.4 PDF | June-13 | |
Elastomeric Bearing Pad - Plan and Vertical Section for NEXT Beams | 8.2.5 CAD | 8.2.5 PDF | June-13 | |
Elevation View, Internal Load Plate Detail, and Designer Notes | 8.2.6 CAD | 8.2.6 PDF | June-13 | |
Standard Bearing Assembly - Plan and Elevation | 8.3.1 CAD | 8.3.1 PDF | June-13 | |
Sole Plate Detail and Designer Notes | 8.3.2 CAD | 8.3.2 PDF | June-13 | |
Standard Bearing Assembly - Section | 8.3.3 CAD | 8.3.3 PDF | June-13 | |
Construction Notes and Bearing Installation Notes | 8.3.4 CAD | 8.3.4 PDF | June-13 | |
Elastomeric Bearing Pad - Standard Detail | 8.3.5 CAD | 8.3.5 PDF | June-13 | |
Retainer Plate Detail | 8.3.6 CAD | 8.3.6 PDF | June-13 | |
Bearing without Anchor Bolts - Plan | 8.3.7 CAD | 8.3.7 PDF | June-13 | |
Bearing without Anchor Bolts - Section | 8.3.8 CAD | 8.3.8 PDF | June-13 | |
Standard Bearing Assembly - Plan and Elevation | 8.4.1 CAD | 8.4.1 PDF | June-13 | |
Standard Bearing Assembly - Section | 8.4.2 CAD | 8.4.2 PDF | June-13 | |
Sole Plate Detail and Designer Notes | 8.4.3 CAD | 8.4.3 PDF | June-13 |
Chapter 9: Railing/Traffic Barrier Systems
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Designer Notes | 9.1.1 PDF | June-13 | ||
Section thru Safety Curb - Stringer Bridges | 9.2.1 CAD | 9.2.1 PDF | June-13 | |
Modifications for Adjacent Beam Bridges | 9.2.2 PDF | June-13 | ||
Section thru Safety Curb - NEXT F Beam Bridges | 9.2.3 CAD | 9.2.3 PDF | June-13 | |
Section thru Sidewalk - Stringer Bridges | 9.2.4 CAD | 9.2.4 PDF | June-13 | |
Section thru Sidewalk - Adjacent Beam Bridges | 9.2.5 CAD | 9.2.5 PDF | June-13 | |
Section thru Sidewalk - NEXT F Beam Bridges | 9.2.6 CAD | 9.2.6 PDF | June-13 | |
Section thru Barrier at Sidewalk | 9.2.7 CAD | 9.2.7 PDF | June-13 | |
Exterior Barrier Elevation | 9.2.8 CAD | 9.2.8 PDF | June-13 | |
Vertical Sections thru Optional Pilasters | 9.2.9 CAD | 9.2.9 PDF | June-13 | |
Modifications for Adjacent Beam Bridges | 9.2.10 PDF | June-13 | ||
Horizontal Sections thru Optional Pilasters | 9.2.11 CAD | 9.2.11 PDF | June-13 | |
Joint Details | 9.2.12 CAD | 9.2.12 PDF | June-13 | |
Top of U-Wingwall Details at Safety Curb | 9.2.13 CAD | 9.2.13 PDF | June-13 | |
Top of U-Wingwall Details at Sidewalk | 9.2.14 CAD | 9.2.14 PDF | June-13 | |
Section thru Safety Curb - Stringer Bridges w /HMA Wearing Surface | 9.3.1 CAD | 9.3.1 PDF | June-13 | |
Section thru Safety Curb - Stringer Bridges w /Exposed Deck | 9.3.2 CAD | 9.3.2 PDF | June-13 | |
Section thru Safety Curb - NEXT F Beam Bridges w /HMA Wearing Surface | 9.3.3 CAD | 9.3.3 PDF | June-13 | |
Section thru Safety Curb - NEXT F Beam Bridges w /Exposed Deck | 9.3.4 CAD | 9.3.4 PDF | June-13 | |
Anchor Bolt Pocket - Bridges w/ Exposed Deck | 9.3.5 CAD | 9.3.5 PDF | June-13 | |
Section thru Sidewalk - Stringer Bridges | 9.3.6 CAD | 9.3.6 PDF | June-13 | |
Section thru Sidewalk - Adjacent Beams w/ HMA Wearing Surface. | 9.3.7 CAD | 9.3.7 PDF | June-13 | |
Section thru Sidewalk - Adjacent Beams w/ Exposed Deck | 9.3.8 CAD | 9.3.8 PDF | June-13 | |
Section thru Sidewalk - NEXT F Beam Bridges w /HMA Wearing Surface | 9.3.9 CAD | 9.3.9 PDF | June-13 | |
Section thru Sidewalk - NEXT F Beam Bridges w /Exposed Deck | 9.3.10 CAD | 9.3.10 PDF | June-13 | |
Top of U-Wingwall Details at Safety Curb | 9.3.11 CAD | 9.3.11 PDF | June-13 | |
Top of U-Wingwall Details at Sidewalk | 9.3.12 CAD | 9.3.12 PDF | June-13 | |
Section thru Safety Curb - Stringer Bridges | 9.4.1 CAD | 9.4.1 PDF | June-13 | |
Modifications for Adjacent Beam Bridges | 9.4.2 PDF | June-13 | ||
Section thru Safety Curb - NEXT F Beam Bridges | 9.4.3 CAD | 9.4.3 PDF | June-13 | |
Section thru Sidewalk - Stringer Bridges | 9.4.4 CAD | 9.4.4 PDF | June-13 | |
Section thru Sidewalk - Adjacent Beam Bridges | 9.4.5 CAD | 9.4.5 PDF | June-13 | |
Section thru Sidewalk - NEXT F Beam Bridges | 9.4.6 CAD | 9.4.6 PDF | June-13 | |
Section thru Barrier at Sidewalk | 9.4.7 CAD | 9.4.7 PDF | June-13 | |
Top of U-Wingwall Details at Safety Curb | 9.4.8 CAD | 9.4.8 PDF | June-13 | |
Top of U-Wingwall Details at Sidewalk | 9.4.9 CAD | 9.4.9 PDF | June-13 | |
Section thru Barrier and Overhang - Stringer Bridges | 9.5.1 CAD | 9.5.1 PDF | June-13 | |
Modifications for Adjacent Beam Bridges | 9.5.2 PDF | June-13 | ||
Section thru Barrier and Overhang - NEXT F Beam Bridges | 9.5.3 CAD | 9.5.3 PDF | June-13 | |
Top of U-Wingwall Details | 9.5.4 CAD | 9.5.4 PDF | June-13 | |
Modifications for Protective Screen Type II | 9.5.5 CAD | 9.5.5 PDF | June-13 | |
Section thru Barrier and Overhang - Stringer Bridges | 9.6.1 CAD | 9.6.1 PDF | June-13 | |
Modifications for Precast Adjacent Beam Bridges | 9.6.2 PDF | June-13 | ||
Section thru Barrier and Overhang - NEXT F Beam Bridges | 9.6.3 CAD | 9.6.3 PDF | June-13 | |
Top of U-Wingwall Details | 9.6.4 CAD | 9.6.4 PDF | June-13 | |
Modifications for Protective Screen Type II | 9.6.5 CAD | 9.6.5 PDF | June-13 | |
Double Face Median Barrier | 9.7.1 CAD | 9.7.1 PDF | June-13 | |
Single Face Median Barrier with Joint System | 9.7.2 CAD | 9.7.2 PDF | June-13 | |
Single Face Median Barrier with Top Slab | 9.7.3 CAD | 9.7.3 PDF | June-13 | |
Sidewalk Curb Details - Bridges with HMA Wearing Surface | 9.8.1 CAD | 9.8.1 PDF | June-13 | |
Face of Curb Details - Exposed Deck Bridges | 9.8.2 CAD | 9.8.2 PDF | June-13 | |
Face of Safety Curb for CT-TL2 Barrier | 9.8.3 CAD | 9.8.3 PDF | June-13 | |
Face of Safety Curb for CP-PL2 Barrier | 9.8.4 CAD | 9.8.4 PDF | June-13 | |
Face of Safety Curb for CF Barriers | 9.8.5 CAD | 9.8.5 PDF | June-13 | |
Sidewalk, Safety Curb, and Median Slabs | 9.9.1 CAD | 9.9.1 PDF | June-13 | |
CT-TL2 and CP-PL2 Barriers | 9.9.2 CAD | 9.9.2 PDF | June-13 | |
CF Barriers and Notes | 9.9.3 CAD | 9.9.3 PDF | June-13 |
Chapter 10: Expansion Joints
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Typical Joint Detail - HMA Wearing Surface | 10.1.1 CAD | 10.1.1 PDF | June-13 | |
Typical Joint Detail - Exposed Concrete Decks | 10.1.2 CAD | 10.1.2 PDF | June-13 | |
Construction Sequence Notes | 10.1.3 CAD | 10.1.3 PDF | June-13 | |
Joint Details - S3-TL4 Railing | 10.1.4 CAD | 10.1.4 PDF | June-13 | |
Joint Details - CT-TL2 Barrier | 10.1.5 CAD | 10.1.5 PDF | June-13 | |
Joint Details - CP-PL2 Barrier | 10.1.6 CAD | 10.1.6 PDF | June-13 | |
Joint Details - CF Barriers | 10.1.7 CAD | 10.1.7 PDF | June-13 | |
Joint Detail at Median | 10.1.8 CAD | 10.1.8 PDF | June-13 | |
S3-TL4 Railing Plan - Skew ≤ 35 degrees | 10.2.1 CAD | 10.2.1 PDF | June-13 | |
S3-TL4 Railing at Sidewalk Plan - Skew > 35 degrees | 10.2.2 CAD | 10.2.2 PDF | June-13 | |
S3-TL4 Railing at Safety Curb Plan - Skew > 35 degrees | 10.2.3 CAD | 10.2.3 PDF | June-13 | |
Barriers - Plan - Skew ≤ 35 degrees | 10.2.4 CAD | 10.2.4 PDF | June-13 | |
CP and CT Barriers at Sidewalk Plan - Skew > 35 degrees | 10.2.5 CAD | 10.2.5 PDF | June-13 | |
Barriers at Safety Curb Plan - Skew > 35 degrees | 10.2.6 CAD | 10.2.6 PDF | June-13 | |
Transverse Section thru Roadway | 10.2.7 CAD | 10.2.7 PDF | June-13 | |
Transverse Section thru Sidewalk | 10.2.8 CAD | 10.2.8 PDF | June-13 | |
Transverse Section thru Sidewalk and Table | 10.2.9 CAD | 10.2.9 PDF | June-13 | |
Longitudinal Sections - S3-TL4 Railing | 10.2.10 CAD | 10.2.10 PDF | June-13 | |
Longitudinal Sections - CP-PL2 Barrier | 10.2.11 CAD | 10.2.11 PDF | June-13 | |
Longitudinal Section - CF Barriers | 10.2.12 CAD | 10.2.12 PDF | June-13 | |
Longitudinal Sections - CT-TL2 Barrier | 10.2.13 CAD | 10.2.13 PDF | June-13 | |
Typical Vertical Sections thru Barriers | 10.2.14 CAD | 10.2.14 PDF | June-13 | |
Splice Details | 10.2.15 CAD | 10.2.15 PDF | June-13 | |
Strip Seal Joint Construction Notes | 10.2.16 CAD | 10.2.16 PDF | June-13 |
Chapter 11: Concrete Box Culverts
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Typical Plan | 11.1.1 CAD | 11.1.1 PDF | June-13 | |
Typical Elevation | 11.1.2 CAD | 11.1.2 PDF | June-13 | |
Typical Longitudinal Section | 11.1.3 CAD | 11.1.3 PDF | June-13 | |
Typical Plan | 11.2.1 CAD | 11.2.1 PDF | June-13 | |
Typical Elevation | 11.2.2 CAD | 11.2.2 PDF | June-13 | |
Typical Longitudinal Section | 11.2.3 CAD | 11.2.3 PDF | June-13 | |
Precast Approach Slab Shelf - Details | 11.2.4 CAD | 11.2.4 PDF | June-13 | |
C.I.P. Approach Slab Shelf - Details | 11.2.5 CAD | 11.2.5 PDF | June-13 | |
Typical Section | 11.3.1 CAD | 11.3.1 PDF | June-13 | |
Designer Notes | 11.3.2 PDF | June-13 | ||
Culvert Joint Detail - Section at Wingwall | 11.3.3 CAD | 11.3.3 PDF | June-13 | |
Culvert End Detail | 11.3.4 CAD | 11.3.4 PDF | June-13 | |
Face of Culvert Details | 11.3.5 CAD | 11.3.5 PDF | June-13 |
Chapter 12: Integral Abutments
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
Terminology | 12.1.1 PDF | June-13 | ||
Abutment Plan | 12.1.2 CAD | 12.1.2 PDF | June-13 | |
Section at Centerline of Abutment | 12.1.3 CAD | 12.1.3 PDF | June-13 | |
Horizontal Section at Bridge Seat | 12.1.4 CAD | 12.1.4 PDF | June-13 | |
Wingwall Elevation | 12.1.5 CAD | 12.1.5 PDF | June-13 | |
Wingwall Section and Movement Joint Section | 12.1.6 CAD | 12.1.6 PDF | June-13 | |
Abutment Section - Rolled Beams | 12.2.1 CAD | 12.2.1 PDF | June-13 | |
Abutment Section - Plate Girders | 12.2.2 CAD | 12.2.2 PDF | June-13 | |
Abutment Section - NEBT Beams | 12.2.3 CAD | 12.2.3 PDF | June-13 | |
Abutment Section - Spread Box Beams | 12.2.4 CAD | 12.2.4 PDF | June-13 | |
Abutment Section - NEXT F Beams | 12.2.5 CAD | 12.2.5 PDF | June-13 | |
Abutment Reinforcement | 12.2.6 CAD | 12.2.6 PDF | June-13 | |
Abutment Reinforcement - Bridge w/ NEXT F Beams | 12.2.7 CAD | 12.2.7 PDF | June-13 | |
Approach Slab Bracket | 12.2.8 PDF | June-13 | ||
Horizontal Section | 12.2.9 CAD | 12.2.9 PDF | June-13 | |
Integral Wingwall Sections | 12.2.10 CAD | 12.2.10 PDF | June-13 | |
Construction Notes | 12.2.11 CAD | 12.2.11 PDF | June-13 | |
Pile Notes | 12.2.12 CAD | 12.2.12 PDF | June-13 | |
Reinforcement Selection Tables | 12.2.13 PDF | June-13 | ||
Designer Notes | 12.2.14 PDF | June-13 | ||
Beam End Details - Rolled Beams | 12.3.1 CAD | 12.3.1 PDF | June-13 | |
Beam End Details - Plate Girders | 12.3.2 CAD | 12.3.2 PDF | June-13 | |
Beam End Details - NEBT Beams | 12.3.3 CAD | 12.3.3 PDF | June-13 | |
Beam End Details - Spread Box Beams | 12.3.4 CAD | 12.3.4 PDF | June-13 | |
Beam End Details - NEXT F Beams | 12.3.5 CAD | 12.3.5 PDF | June-13 | |
Pedestal Plan | 12.3.6 CAD | 12.3.6 PDF | June-13 | |
Pedestal Plan - NEXT F Beams | 12.3.7 CAD | 12.3.7 PDF | June-13 | |
Deck Placement Sequence | 12.4.1 CAD | 12.4.1 PDF | June-13 | |
Abutment Backfill | 12.4.2 CAD | 12.4.2 PDF | June-13 | |
Utility Details at Abutment | 12.4.3 CAD | 12.4.3 PDF | June-13 | |
Utility Details for Conduit Bank | 12.4.4 CAD | 12.4.4 PDF | June-13 |
Standard Railings, Screens, Terminuses, and Highway Guardrail Transitions
Download all Standard Railings, Screens, Terminuses, and Highway Guardrail Transitions PDF files
Description | AutoCAD | Issue Date | Revision Date | |
---|---|---|---|---|
S3-TL4 Bridge Railing | CAD | June-13 | ||
CM-TL3 Bridge Railing | CAD | June-13 | ||
Type I Protective Screen | CAD | June-13 | ||
Type II Protective Screen (Sheet 1 of 2) | CAD | June-13 | ||
Type II Protective Screen (Sheet 2 of 2) | CAD | June-13 | ||
Type II Electrification Barrier | CAD | June-13 | ||
Handrail | CAD | June-13 | ||
Snow Fence for CP-PL2 and CF Barriers (Sheet 1 of 2) | CAD | June-13 | ||
Snow Fence for CP-PL2 and CF Barriers (Sheet 2 of 2) | CAD | June-13 | ||
Top of Precast Highway Guardrail Transition for S3-TL4 Railing | CAD | June-13 | ||
Top of Precast Highway Guardrail Transition for CT-TL2 Barrier | CAD | June-13 | ||
Top of Precast Highway Guardrail Transition for CP-PL2 Barrier | CAD | June-13 | ||
Top of Precast Highway Guardrail Transition for CF-PL2 Barrier | CAD | June-13 | ||
Top of Precast Highway Guardrail Transition for CF-PL3 Barrier | CAD | June-13 | ||
Highway Guardrail Transition for CM-TL3 Railing | CAD | June-13 | ||
Terminus for CM-TL3 Railing | CAD | June-13 |